Best Answer

Though it is tempting to say the difference is 2 ohms (8 ohms minus 2 ohms equals 6 ohms), lets look at some things. The 6 ohms is 3/4ths the resistance of the 8 ohms. If the resistances are loads, the 6 ohm load will draw 1/3rd more current than the 8 ohm load. The 8 ohm load will draw 3/4ths as much as the 6 ohm load. Those are some differences between 6 ohms and 8 ohms.

More answers

4 ohm. Essentially, the ohm (Ω) is representative of electrical impedance or resistance (R), and is proportional to power (P) measured in Watts, i.e.

P = I2R

where I represents current measured in amperes.

The difference is 2 ohm.

1 ohm is much smaller than 100 ohms.

Q: What is the difference between 6 ohms and 8 ohms?

Write your answer...

Submit

Still have questions?

Continue Learning about Engineering

wire two 8 ohm speakers in a parallel circuit!

16 Ohms. Yes 16 ohms in series. 4 ohms in parallel

6 (blue) 8 (green) x 101 (brown)

For an 8 ohm speaker, 8 ohms is perfect. "Good" and "bad" are relative to the application.

Two 8 ohm speakers in parallel is 4 ohms, and the power will be split between them. However, unless the amplifier is rated for 4 ohm operation, you will not get the same total power out of the amplifer as you would with an 8 ohm load.

Related questions

It has to do with the load on the amplifier, you can't hear the difference.

NO. It depends on which you are subtracting from which. For example, the difference between 8 and 6 is 2 (8 - 6 = 2) but the difference between 6 and 8 is -2 (6 - 8 = -2).

NO. It depends on which you are subtracting from which. For example, the difference between 8 and 6 is 2 (8 - 6 = 2) but the difference between 6 and 8 is -2 (6 - 8 = -2).

14 - 8 = 6 because finding the difference between is the same as saying, "yo boi, subtract these two numbers."

Study ohms law to get your head around it.

The difference between 6 and -2 is 8. The quotient 20/8 = 2.5

It is: 14 -8 = 6

It is the impedence (coil resistence)normally sub component (drivers)are in 8 ohms impedence.2 in parralel is 4 ohms and 4 in parralel makes it 2 ohms.

There is a difference of 6.

If the spec is 6-8 and you have 1.2, the part is failed.

Mega is 8 X 10^6 and Kilo is 8000 X 10^3. For every 3 you go down in powers you divide by 1000, so 8 Mega ohms is 8,000,000 ohms. 8,000 Kilo ohms or 0.008 Giga ohms.

One has 6 holes the other has 8