For an 8 ohm speaker, 8 ohms is perfect. "Good" and "bad" are relative to the application.
600 by 208
Current, by Ohm's Law, is voltage divided by resistance, so, 18 volts divided by 2 ohms is 9 amperes.
To find the equivalent resistance of resistors in series, you simply add their resistances together. In this case, the equivalent resistance ( R_{\text{eq}} ) is calculated as follows: [ R_{\text{eq}} = R_1 + R_2 + R_3 = 20 , \text{ohms} + 12 , \text{ohms} + 8 , \text{ohms} = 40 , \text{ohms}. ] Thus, the equivalent resistance of the circuit is 40 ohms.
Ohm's Law: Resistance = Voltage divided by Current 40 volts divided by 5 amperes = 8 ohms.
Two 8 ohm speakers in parallel is 4 ohms, and the power will be split between them. However, unless the amplifier is rated for 4 ohm operation, you will not get the same total power out of the amplifer as you would with an 8 ohm load.
600 by 208
this is range of 4 ohms resistance in an electrical device. Ohms is a measure of resistance in electrical qualities. Circuits and devices are rated , or measured for there resistance in ohms to meet a designed electrical need. Is this related to a speaker?
The wattage and ohms of a speaker are not related; the resistance for speakers is usually 4 or 8 ohms.
According to the Wire resistance tables, 8 AWG has a resistance of 0.6282 ohms per thousand feet.
Current, by Ohm's Law, is voltage divided by resistance, so, 18 volts divided by 2 ohms is 9 amperes.
To find the equivalent resistance of resistors in series, you simply add their resistances together. In this case, the equivalent resistance ( R_{\text{eq}} ) is calculated as follows: [ R_{\text{eq}} = R_1 + R_2 + R_3 = 20 , \text{ohms} + 12 , \text{ohms} + 8 , \text{ohms} = 40 , \text{ohms}. ] Thus, the equivalent resistance of the circuit is 40 ohms.
When a resistor is in series. Total resistance =R1+T2+R3. Therefore 20+8+4=32 The total resistance is 32 ohms.
Ohm's Law: Resistance = Voltage divided by Current 40 volts divided by 5 amperes = 8 ohms.
Two 8 ohm speakers in parallel is 4 ohms, and the power will be split between them. However, unless the amplifier is rated for 4 ohm operation, you will not get the same total power out of the amplifer as you would with an 8 ohm load.
Ohm's Law: voltage is current times resistance, so 8 amps times 2 ohms is 16 volts.
To find the resistance of the appliance, you can use Ohm's Law, which states that resistance (R) is equal to voltage (V) divided by current (I). In this case, R = V/I = 120V / 15A = 8 ohms. Therefore, the resistance of the appliance is 8 ohms.
That is possibly the input impedance of a loudspeaker - not an impedance of an amplifier.