Cat 5 straight cables conections are straight e.g. 1 - 1, 2 - 2 etc With crossover cables wires its wired like so: 1 - 3 2 - 6 3 - 1 4 - 4 5 - 5 6 - 2 7 - 7 8 - 8
what is different between cross cabling and straight cabling ANSWER: a crossover cable is used to connect like devices, like a router to a router, but a straight through cable is used to connect dissimilar devices, like a router to a computer.
Crossover
straight through is same pin out both ends. crossover has transmit and receive lines reversed
straight through is same pin out both ends. crossover has transmit and receive lines reversed
straight through is same pin out both ends. crossover has transmit and receive lines reversed
The difference between a cross cable and a state cable is that a cross cable, or crossover cable, is used specifically to connect two of the same devices.
Same device----> crossover cable Different device->Straight through cable
1. straigth cable are more effective than the crossover cable....
Usually older Ethernet switches needed to be connected using a crossover cable. Now, most modern switches have auto-crossover feature that lets you use a straight Ethernet cable. You could also connect two computers using a crossover cable, but like with switches, most Ethernet interfaces on computers also support auto-crossover.
Yes you can get a crossover cable for any of the Ethernet cable series on one end of the cable two of the smaller cables inside are crossed over so they are not straight through cables
Crossover cable
Use a crossover cable.