A tool is an object that is usually used to craft something into something else. The material is the object or item that is being crafted.
The size of the teeth on the blades and the material the blade is made of. In order for any cutting tool to be effective, the hardness of the tool must be greater than that of the material being worked.
The clear difference between positive and negative rake angles is that for the positive rake angle,the leading edge of the cutting tool is behind the perpendicular of the material to be cut.While the tool leading edge is ahead or beyond the perpendicular for the negative rake angle.
When grinding, an abrasive material such as carborundum is used to remove material from the workpiece. When turning, material is removed from the workpiece with a cutting tool. The worpiece is usually clamped in the jaws of a chuck, and the chuck turns. the tool is clamped to a toolpost and moved along the workpiece and into the workpiece in order to cut material off in a measured amount.
a tool is used by hands and machines aren't
Process=procedure Tool=an implement to do work.
explain the difference between single point & multi point cutting tool
You may be looking for the difference between Climb vs Conventional milling. Also known as Down milling and Up milling respectively. In short, the difference is the direction that the teeth of the cutting tool move relative to the material. This can primarily affect smoothness of resulting cut, tool life, and the force on the machine and material. Better description can be found in these links: http://en.wikipedia.org/wiki/Milling_cutter#Conventional_milling_versus_climb_milling http://clinetoolmexico.com/pdf/fresado_tecnica.pdf
raw material bulk raw material
yes
is the same
There is no difference between poo and crap they are both waste material.
However, if there is a material difference between the expected and actual balance, the auditor will investigate this difference further. At this point the auditor will develop an explanation for the difference.