there is really no difference except woods are like not as powerful as the driver but the woods can be hit in the fairway not the driver
The main difference is length, and sometimes weight.
About 6 inches
The intermediate shaft is the shaft going to the driver side wheel from the tranny. The shaft is suppose to eliminate what you call torque steer, It comes straight from the tranny and bolts to the engine block with a bearing race to hold the shaft and at that brace is where the half shaft, or drive shaft connects to the intermediate shaft and to the driver side hub.
The intermediate shaft is the shaft going to the driver side wheel from the tranny. The shaft is suppose to eliminate what you call torque steer, It comes straight from the tranny and bolts to the engine block with a bearing race to hold the shaft and at that brace is where the half shaft, or drive shaft connects to the intermediate shaft and to the driver side hub.
yeah it should. Other wise the feeling of both will feel different and most likely you will be hitting every where. Doesnt have to be the same shaft just use same flex.
Driver side tail shaft of the transmission.Driver side tail shaft of the transmission.
45"
short tail shaft or long tail shaft trans they are different lengths
A Reverse Shaft is the shaft which rotates in the opposite direction of the engine driver shaft with the help of meshing of gears mounted on it to the gears mounted on engine driver shaft when reverse gear is applied. The reverse shaft allows the vehicle to move in reverse direction. Sanjay Singh Rathore (ME 3rd year) M.I.T.Mandsaur
Handle shaft tip
The main differences are a fairway wood has a smaller head, more loft and a shorter shaft. Obviously the driver has a larger head to a maximum of 460cc, a loft of mainly 8.5 to 10.5 degrees, and a shaft which can be around 44-46 inches long.
Different shafts are made for different people. It is important that you get one that is made for your swing. Your swing speed determines your shaft. The faster you swing, the stiffer shaft you need. There are also things like torque which is the shafts ability to resist twisting. The faster you swing, the more torque you are going to have. For more detail on this go to the link below.
you can change it but you have to get either a shaft that already is compatible with the str8-fit or someone to install the shaft into the str8-fit ending.