An analog phase shifter provides a phase shift with a varying control voltage.
A digital phase shifter switches among phase states to provide discrete phase shifts. the more bits there are, the smaller the quantization/digitization error. For example,
1 bit phase shifter provides a phase shift of 0 and 180°, or 0 and 90°.
2 bit phase shifter provides a phase shift of 0, 90°, 180° and 270°.
3 bit phase shifter provides a phase shift of 0, 45°, 90°, 135°, 180°, 225°, 270°, 315°, 360°.
Analog is displayed in a clock like instrument digital is shoun in numbers
Analog signals are continuous while digital signals are discrete
The ANALOG FILTER used in analog circuits.The DIGITAL FILTER USED IN DIGITAL circuits.
Psoc includes the analog and digital component where else in controller only digital. :P
The big difference is inputs and outputs. Digital ICs expect high/low true/false inputs and outputs. Analog ICs take any inputs, and produce outputs of any level. For example, an audio amplifier is an analog IC. It takes an analog input (sound), and produces an analog output (louder sound). A ripple counter is an example of a digital IC. It takes a digital input (clock pulses), and produces a number of digital outputs (the digital outputs of the flip flops, collectively representing a number in binary).
The basic difference is that in analog modulation the modulating signal is analog signal and in digital modulation it is in digital form.
Analog can reach higher speeds.
k,
Analog is displayed in a clock like instrument digital is shoun in numbers
In analog ckt there is more distortion but in digital there is no distortion. Analog is a continues value digital is a discrite value(0 or 1). To measure analog is very difficult but in digital it is very easy. compare to analog the digital system is very compart for us. H.L.Kiran
Analog is a clock with the moving hands on it, while digital is computer generated numbers.
Analog signals are continuous while digital signals are discrete
* Codec is for coding analog data into digital form and decoding it back. The digital data coded by Codec are samples of analog waves. * Modem is for modulating digital data into analog form and demodulating it back. The analog symbols carry digital data.
Analog communication considers infinite amplitude levels. But in digital communication only 2 levels of signal is present.
please help me to understand the word transducer
In a analog transmitter the RF carrier have to be modulated with the analog signal either by AM or FM where in digital transmitter the carrier is simply switched on and off a off = a zero and on = a one
The main difference between these scales it that the digital will give a more accurate and easier to read reading than figuring it out with the lines between the numbers the analog scale. However, the digital scale requires and battery and the analog does not.