Fuse wire is designed to open under over current conditions.
Just like a fuse.
AWG= American wire guage SWG = standard wire guage
I was a soldier so I dealt with both types alot. Constantina wire has sharp little squares where as razor wire has bigger razor blade shaped barbs.
AWG is American wire gauge and SWG means Standard wire gauge .. swg+1=awg according to my calculation...
The major difference is that Swingline staplers have staples that are only designed for used with this type of stapler. Additionally, a Swingline stapler uses heavy-duty staples that have a minimum of 135,000 PSI wire for greater tensile strength.
The temperature of the wire will increase and eventually like the "straw breaking the camel's back" the wire will fail if you apply enough current. It is like exceeding the current in a fuse, the wire essentially disintegrates.
An important type of winding wire
ewan ko
A fuse should be connected in the live wire, before reaching the appliance.
GMAW (solid wire) vs. FCAW (flux-cored wire). The Most important difference between FCAW and GMAW is welding wire,
You connect the fuse to the live wire as it is the one with the potential difference of 220V and in case of short circuit current will blow out here
... a potential difference between the ends of the wire.
Yes, the red wire is a positive wire (+) and the black wire is a negative wire (-) :D
NO. Usually the positive wire will have the fuse.
Why is it dangerous to replace a fuse with a wire that bypasses the fuse
The 15 amp fuse.
A circuit breaker does not have a wire fuse in it.
AWG= American wire guage SWG = standard wire guage