Want this question answered?
Heat is absorbed by the refrigerant liquid inside the fridge, and rejected by the heat exchanger on the back of it.
Counterflow heat exchangers typically transfer more heat to a fluid simply because the hottest part of the exchanger is where the heating medium enters the heater and the heated medium leaves the heater. In a parrallel flow exchanger the hottest part of the heater is where the heating medium enters, and the coolest part where the heated medium enters, and some temperature in between is found where both exit the heater.
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
double pipe heat exchanger is made if two concentric tubes one carrying cold flow and the other one carrying hot flow. but shell and tube hear exchangers are made of a shell like a vessel filled with many thin tubes to transfer heat between fluids. there are more data available at : http://scopewe.com/double-pipe-heat-exchanger-design-part-1/
The duty of a heat exchanger can be defined in an easy way as "The amount of heat exchanged from a fluid at a higher temperature to the fluid at lower temperature in unit time by a heat exchanger is called its duty"
actually there is no difference , infact condenser itself is a heat exchanger
Calorifer is a heat exchanger, with a specific of air (or other gas) preheat. Usually is directly in a Duct installed. Heat Exchanger usually is separate unit.
difference between cooler and heat exchangers
Heater produsces - heat recovery finds heat and reuses it
A heat exchanger is a device that transfers heat from one fluid to the others. A condenser is simply a heat exchanger. It compresses refrigerants into a hot gas to then condense them into a liquid. Majorly condenser is used to cool the required vapor and heat exchanger is used to heat the required liquid.
One major benefit of a heat exchanger is that it quickly transfers heat from one medium to another such as an air conditioning unit or a space heater.
Heat is absorbed by the refrigerant liquid inside the fridge, and rejected by the heat exchanger on the back of it.
A heater core in a vehicle takes some of the heat from the coolant and runs it through a heat exchanger. The blower in the car that blows hot air into your car runs through that heat exchanger which heats the air that enters your car.
Counterflow heat exchangers typically transfer more heat to a fluid simply because the hottest part of the exchanger is where the heating medium enters the heater and the heated medium leaves the heater. In a parrallel flow exchanger the hottest part of the heater is where the heating medium enters, and the coolest part where the heated medium enters, and some temperature in between is found where both exit the heater.
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
The way a heat exchanger work is that you can exchange for a another heater for a leased value. You may have to pay a little bit more which in some places it is better to purchase then to lease.
double pipe heat exchanger is made if two concentric tubes one carrying cold flow and the other one carrying hot flow. but shell and tube hear exchangers are made of a shell like a vessel filled with many thin tubes to transfer heat between fluids. there are more data available at : http://scopewe.com/double-pipe-heat-exchanger-design-part-1/