a zener regulator must sustain its own current to function plus the load currents IC regulator on the other hand will require very little current to sustain regulation plus there is a gain regulation that a zener do not have.
zener diode is a revers bias diode which used for voltage regulation.
to limit the voltage or regulate the same.
3.2
zener diode
It depends on the particular zener diode. Typically, they will pull 75 ma of current.
Zener diode is heavily doped pn junction diode.
The difference between the pn-junction diode and the zener diode is that the pn-junction diode is used for rectification while the zener diode is used for rectification and stabilization. Also, the zener diode can function in the breakdown region while the pn-juntion diode can not function in that regime.
what is the difference between reverse characteristics of zener diode and a practical diode ?
zener resistance of a zener diode is the resistance of the zener diode but which is the resistance of a diode
Zener diodes and ordinary junction diodes are similar, except that zener diodes have additional doping to bring their reverse breakdown voltage into a more usable value, and to allow them to not destructively avalanche when they do conduct in the reverse direction.
A: They are both diodes. The difference lies in the application. A rectifier is used to rectify AC current into pulsating current. The zener diode is used to regulate a voltage source to the zener voltage when connected in the reverse direction. ************************************************************** If you look at the characteristic curves of a rectifier diode and a zener diode, you will see that they are similar, but the reverse curve of the zener has a much sharper bend at what is called the "knee". It is at this point on the zener's curve at which it operates.
zener diode :zener diode operates under reverse bias voltageideal diode :ideal diode operates under forward bias voltage
The zener diode is optimized for reverse breakdown voltage accuracy and stability. This value and its tolerance is specified in more detail than a normal diode.
ZENER DIODE IS MADE TO REVERSE BREAK OVER AT A CERTAIN VOLTAGE the break over knee is not exactly sharp especially in low voltage zeners. and p-n means positive and negative junction
A zener diode cannot be used as switch.
Dr. Clarence Melvin Zener of Southern Illinois University invented the zener diode.
zener diode is a revers bias diode which used for voltage regulation.