they have different names
A Pump is a mechanical device which transfers Liquid from a lower point to a higher point.Eg: Centrifugal pump,Rotary pump,Reciprocating pump.
A Compressor is a high pressure mechanical device which basically compressors air/gas
Well, a compressor compresses a gas and a pump moves a liquid. Compressors are often used in refrigeration applications where gas is transformed into a liquid and vice-versa, so the main task for the compressor is not to move the gas but to compress it.
pump is used to handle liquid and compressor is used to handle gases. other difference include blade shape etc..
The only one difference in b/w compressor and pump rotor is impeller shroud width.Fluid is incompressible so impeller shroud width is not change and gas is compressible so impellers are tends to thin in width to the discharge side.
pump is used to move liquid from one point to another, while compressor is used to compress and move gases from point to point.
It is an air pump.
Pump relay is used to increase the pressure of incompressible fluids (i.e., density is constant for change in pressure) Compressor relay is used to compress the pressure of compressible fluids (i.e.,density varies with pressure)
Air ride compressor, air suspension compressor, and air pump are the names used for the same device. They are used to pump up the air suspension.
what is difference between dynamic and volumatic compressor
It does not have an Air Compressor. If you are talking about the A/C Compressor, then just look at the drive belts. One of these belts is driving the compressor. If it has one serpentine belt, it is driving the A/C compressor, PS pump, Alternator, & Water Pump. Just follow the belt to find it.
A pump or compressor.
Are you sure it is the A/C Compressor and not the power steering pump? LS400, SC 300 and SC 400 are known to have power steering pump issues that leak onto the compressor causing ac compressor failure. Replace the pump as soon as you see a leak.
pump is used to move liquid from one point to another, while compressor is used to compress and move gases from point to point.
Depends. You didn't give a model number (e.g., CM850, etc.). Pre-SCR trucks typically had one mounted to the back of the compressor, and the compressor shaft turned the pump. SCR models have a standalone high pressure pump below the air compressor.