An 'amp' is a slang expression for 'ampere', whose correct symbol is 'A'. An ampere is the SI base unit for electric current, and is defined in terms of the force between parallel, current-carrying, conductors due to the magnetic fields that surround them. WebRep
currentVote
noRating
noWeight
A 'volt' (symbol: 'V') is the SI derived unit for potential difference (voltage), and is defined in terms of the energy required to separate electric charge.
Potential difference, or voltage, can be thought of as the 'electrical pressure' responsible for causing current to pass through a conductor.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
The terminal strip's rating is 15 amps at 600 volts. It does not matter what the voltage is up to 600 volts, the maximum amperage allowed on the strip is 15 amps. It could be 15 amps at 12 volts or 15 amps at 600 volts or any voltage in between.
There is no direct relationship between watts and volts. Watts = volts x current in amps.
Fuses are rated in Amps. Although the physical size of a fuse is to do with volts; the further the terminals are apart the less likelihood there is of 'sparkover' between them.
You have your own answer. It is 1.5 amps.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
Amps are units of current, watts are units of power. Watts are the product of Amps times Volts. Watts = Amps x Volts.
Amperes does not convert into volts they are two different values. Become familiar with the following formula and look at the relationships between the values. Volts = Amps x Resistance, Amps = Volts / Resistance and Resistance = Volts / Amps.
The terminal strip's rating is 15 amps at 600 volts. It does not matter what the voltage is up to 600 volts, the maximum amperage allowed on the strip is 15 amps. It could be 15 amps at 12 volts or 15 amps at 600 volts or any voltage in between.
Watts = Volts / Ohms Watts = Volts x Amps
There is no direct relationship between watts and volts. Watts = volts x current in amps.
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
Fuses are rated in Amps. Although the physical size of a fuse is to do with volts; the further the terminals are apart the less likelihood there is of 'sparkover' between them.
6 amps.
160 amps at 12v.
160 amps at 12v.