What is the dimension of garage?
Garages come in many sizes ranging from small single-car garages to huge multi-story public garages.
Length x width of the interior edge of the foundation. Also, add the dimension of any attached enclosed garage in the figure. Non-enclosed or detached garage or car port do not apply.
The location (country) is more important than the appearance.
The average dimension for a tandem garage with only one door for vehicle access is a 14 foot door that is about 14 feet high. The interior space might be about 16 to 20 feet wide and 13 to 16 feet in depth. A two-door tandem garage is going to be about 16 to 20 feet wide and 16 to 20 feet in depth.
What is the area for a garage with 3 walls total length is 66 feet and the kitchen wall is the fourth wall?
This can not be answered with the information given. To find the area you must know two dimensions and you only gave one dimension and that was the length of 66feet. Also you asked for area of a garage but a garage is an open space.. you should be looking for volume so in actuallity you need give three dimensions. You should give the length of each wall the height of each wall and how… Read More
Driving Dimension: the geometry is controlled by the dimension. Driven Dimension: the dimension is controlled by the geometry.
The Third Dimension is the dimension of space, the one we are in now. The Fourth Dimension is the theoretical dimension of time, which overlaps onto the 3'rd Dimension.
Where does the lead plug into of a Dell Samsung fmd9410ndl1 flash card reader after fitting to a PC?
As far as I can tell, it's a proprietary connection on the motherboards of the following Dell desktop systems: * Dimension 3100 * Dimension 5000 * Dimension 5100 * Dimension 5150 * Dimension 9100 * Dimension 9150 * Dimension E310 * Dimension E510 * XPS 400
Momentum = Mass X Velocity Velocity = Displacement/Time Dimension of Mass = M Dimension of Displacement = L Dimension of Time = T Therefore Dimension of Velocity = LT-1 Therefore Dimension of Momentum = MLT-1
Lines that define the parameters of a dimension. Dimension lines are thin lines terminating in arrowheads. Place dimension lines no closer than 3/8" from the object outline. Parallel dimension lines should be a minimum of 1/4" apart. You may place parallel dimension lines more than 1/4" apart so long as the spacing between dimension lines is uniform throughout the drawing. Dimension lines are generally broken in the center of the line to provide a space… Read More
The 2 dimension is times 2 but if it is 3 dimension is times 3
GARAGE a small garage= petite garage a big garage = grande garage Garage is the same in french as well as in English!
THere was a dimension in my classroom
The fourth dimension.
Traditional Dimension One: Positivistic, Scientific, Objective, Quantitative Dimension Two: Masculine attributes, patriarchal perspectives Dimension Three: Standard of Whiteness Dimension Four: Separateness, impersonality, oppositional, competition Dimension Five: Privileged Status Alternative Dimension One: Interpretive, intuitive, subjective, qualitative Dimension Two: Feminine Attributes, feminist perspective Dimension Three: Diversity Dimension Four: Interconnectedness, integration, differences viewed as complementary Dimension Five: Recognition of Oppressions and elimination of privilege
The first dimension is primary (length). The second dimension is secondary (width). The third dimmension is tertiary (height). Those are the 3 basic spatial dimensions. The fourth dimension is time. The fifth dimension is the rotation of primary. The sixth dimension is the rotation of secondary (and primary). The seventh dimension is the rotation of tertiary (secondary and primary). The eighth dimension is the pulse of time. The ninth dimension is the energy radiation of… Read More
Yes there are such things of dimension.
find the dimension.
A position, by itself, has no dimension.
The dimension is [L].
its the 2nd dimension
it is the dimension of force over dimension of area. stress = force/area Why, that's just pressure !
1.physical dimension 2.mental dimension 3.social dimension
The fourth dimension is Time.
The dimension is 44.
yes,time is the 4th dimension...
Any integer dimension that you like.
Three, of course!
Rob Dimension is 6'.
The linear dimension 62 inches is equal to the metric linear dimension 1.5748 meters
The fourth dimension is time, but the fourth physical dimension has not been discovered yet.
An "other dimension" is a dimension other than the three dimensions of space and one of time that we normally experience.
Dimension defines a specific measurement. A dimension in MS Word could be the width of a printed page.
Depends what u mean by dimension it is not a spacial dimen no but roughness could be a dimension ( just a theory) If time is a dimension that mens we are flowing through it and everything has a set path and we have no control over ourselves also time travel can only be real if time is a dimension and if it is we could predict the future as everything has a set path… Read More
the dimension of a basketball board was 1x1"
a dimension is lengh, width, and height
It's spelt the same: dimension.
Length IS a dimension (in space). It has no thickness.
The same as the dimension of R
Yes, dimension does have a suffix. The suffix is -ion.
The dimension is 1, of Length or [L].
volume and stress and area have no dimension
Dimension Records was created in 1962.
7 The dimension you provide is not a squared dimension but a linear dimension. There are no squared dimensions in a linear dimension. There are 7 linear yards in 21 linear feet, but no squared yards.
information presented to the management is estimated to have its dimension in terms of cost, business and technical issues involved. various dimension of information system(MIS) are- 1) economic dimension. (a) cost of information, (b) value of information, 2) business dimension. 3) technical dimension.
Nominal Dimension Lumber is what it's cut to and Net dimensional Lumber is what it actually is.
In the unidirectional dimension system, all dimension figures and notes are lettered horizontally and are read from the bottom of the drawing. The unidirectional dimension system is preferred over the aligned system because it is easier to read and understand.
Shed = Schuppen Garage = Garage
Dimension is = the number of variables used in the equation
You'd get a new answer.