drop the engine cradle and pull it out the bottom
The easiest way to disable the 1998 Chevy Lumina factory alarm is to remove the factory alarm fuse. The factory alarm fuse can be found in the fuse box.
How to remove steering wheel on Chevy lumina 2000
The easiest way to bypass the theft deterrent module is to remove the fuse. The location of the fuse can be found on the inside cover of the fuse box.
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
There is a retaining ring behind the window crank. The easiest way to remove and install this is to buy the tool to remove the ring. You can use two small flat screwdrivers to push the flat ends of the ring down at the same time. Then you can just pull the handel off.
You will need to remove the retaining ring at the top of your 1998 Chevy Lumina ignition switch. Slide the ignition switch out. Remove the wiring harness.
The Chevy Lumina dashboard is held in place with retaining bolts and retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
Remove the positive cable from your 1992 Chevy Lumina battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
Drain the oil from your 1996 Chevy Lumina oil pan. Remove the oil pan retaining bolts. The oil pan will come off.
Begin by removing the tire and wheel from your 2000 Chevy Lumina. Remove the brake spring and the break caliper. The rear brakes will come off.
hfgtytbeud
The 1995 Chevrolet Lumina dashboard is held in place with for retaining bolts and 12 retaining clips. Remove the retaining bolts and pry outward on the retaining clips.