Non-uniform magnetic field and a phase shift of 120 electrical degrees will occur.
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
main focus on inductance calculation
what factors on inductance drepends
Soft iron has a greater permeability than steel. BTW, the only reason for laminations is to reduce eddy currents in the core. It has no effect on permeability or inductance.
Inductance
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
increase inductance
it is combined effect of resistance and inductance
main focus on inductance calculation
rotor slot more. it is to get a large rotor inductance value of inductance the stator windings
We are causing an imbalance.
"The magnetic field produced by each turn interacts with the field of other turns and multiplies the effect, causing the inductance of a coil of wire to increase by the number of turns (N) squared. Therefore, if you double the number or turns, you quadruple the inductance."
The series resistance (swamping resistance and multiplier) in pressure coil circuit has many turns.So in addition to inductance seen before, there are inter-turn capacitance also.If this capacitance effect exceeds the inductance effect, a phase-shift in pressure coil current will cause an error.When pressure coil capacitance roughly equals the inductance, the errors cancel each other.In most cases the inductance is more than the capacitance and thus the shunting capacitor mentioned before will serve the purpose.
Type your answer here... By use an inductance meter or an inductance bridge
It is used to measure the inductance of a coil of unknown inductance.
Inductance is measured in henrys.
An inductor can be used, in principle, but it has to be the right inductance, it will waste more power than a capacitor, and the motor would rotate the opposite way.