In foods, this indicates the percentage of water in the total weight of the food. This exceeds the dry weight, and is a portion of the water used in processing.
In lumber, this indicates the remaining water after drying of the wood. Kiln-dried lumber will normally have a lower moisture content than air-dried.
In case of pharmaceutical product moisture content play important role..
- During process
- During Evaluation
- During Stability studies
- During process-Formulator has to optimise the moisture content of a materials and intermediates during entire process.If the initial moisture content of excipients and intermediate product(Lubricated granules) vary batch to batch may causes problems.Eg if high moisture contet can lead to tablet sticking,granules poor flow etc. while low moisture content can lead to tablet capping,tablet rougness,granules brittleness.
-During Evaluation-High content of moisture in product may cause to low assay content while vice versa.Impurities issue,tablet physical appaearnce etc.
-During Stability studies-May cause product degradation mainly,hardness reduction,dissolution differences etc.
Thanks
Saleem Shaikh
The higher the voltage is, the more chance of a flash over in moist conditions. Actually while that is basically correct moisture is water and pure water does not conduct very well the contaminants on the devices and add moisture causes problems.
Nuclear energy may be used to produce electricity and may be used to uplift the space shuttles.Nuclear energy may be used to produce electricity and may be used to uplift the space shuttles.
wood absorbs moisture better
The maximum bulking of sand is in 13% to 14% moisture content. It's likely to be 13.8% moisture content.
the moisture of concrete is main strength for reinforced concrete structure
Electricity does flow back to the power plant. This electricity is what forms the circuit needed to actually deliver the electricity to you when you need it.
1. Gold alloys are resistant to moisture. 2. Gold alloys are good conductors of electricity.
Moisture.
The effects of being shocked by 13200 volts of electricity is probably death.
Any body containing a high moisture content and carbon or salts will conduct electricity. Also metals conduct electricity.
AiR also conduct electricity,like wind power plant.Air has moisture which help it to generate electricity
The positive effects of electricity on the environment are quite limited as mostly electricity has negative impact on the environment. Plants can be said to benefit slightly from the carbon dioxide released in the generation of electricity.
Death
No, BUT -- leather can absorb moisture, and water is a good conductor.
A moisture sensor estimates the amount of water in the soil that is being tested. It works by measuring the soil's ability to conduct electricity, higher moisture means more conducting power.
It effects electricity
Osmosis provides for the transference of moisture.
tsujhgjghj