The current increases.
Short circuit current will increase a lot.
A short circuit occurs when the hot side of the supply comes in contact with ground.
A short circuit is a condition whereby a point or section of the circuit offer a short path for current to return to the power supply. It occurs when two or more points or sections of the circuit touches each others (but only and only if that results in drop in resistance to such an extent that it causes excessive current to flow through.
It is define as twice the maximum symetrical short circuit current.
it will cause a Short Circuit
A short circuit occurs when a low-resistance path is created between two points in a circuit, causing excessive current flow. This can happen due to a wire touching another wire, a conductor coming into contact with metal objects, or a component failure. When a short circuit occurs, it can potentially lead to overheating, damage to components, and even fire.
The output short circuit current is the solar cell's current when the voltage is zero, or when it, is short circuited.
A short circuit is one that is characterized by extremely low resistance. This will result in the extremely dramatic increase of current. High current will flow until a safety device opens the circuit, or the weakest link in it burns out. And one of the two usually occurs in a moment or two.==Short Circuit happens when the cables of the electrical appliances are worn out or it's not connected properly,a short circuit may occure.A short circuit has a very low resistance that almost all electric current flow through it.It'll affect the operation of the electrical appliances.Owing to the heating effect,the excess electric current would produce a large amount of heat,wihout a fuse or a circuit breaker,a fire may be occured when there's a short circuit.
The current in a short circuit may be very high because the resistance in the short circuit is probably less than the resistance in the original circuit.
The unit for short circuit current is typically measured in amperes (A) or kiloamperes (kA). It represents the maximum current that can flow in a circuit under a short circuit condition.
Short circuit ratio is the ratio of field current required for the rated voltage at open circuit to the field current required for the rated armature current at short circuit
Presumably, the current follows a path (a circuit) to do whatever it was "made" to do. If water, for instance, enters the circuit, a shorter path may develop, and the current will (partially) take the short circuit. Or a wire could become lose and short circuit the intended path.