What does debugging a tamagotchi do?

Answer 1

Im improving it. I just did it myself actually, and it works really well. You take the back off like your going to change the battery. Take out the battery and unscrew the 4 screws at the sides. Split it in half and below the battery you will see a circle and above it will be written debug. Rub it with a led pencil for half a minute and put it back together. Get a new egg and when it hatches keep pressing A to scroll through the characters you want. Press c to go onto hyper speed mode and press c again to stop. In debug mode, you will NOT have access to the internet. Hope i helped!

Answer 2

when you debug a tamagotchi you should ask help to your father or mother to help you, because you may brake your tama the first thing you do is to borrow a screwdriver then unscrew it, then you should take away the antenna into 2, then press the debug button then put it to back as the way it was, again a debug operation can brake your tama, it's too risky

Answer 3

WARNING: If you don't want to put your Tamagotchi at risk of breaking, I would suggest either not doing this or doing this very carefully.

What you need:

1. Lead Pencil

2. Tamagotchi

3. Different size screwdrivers

Okay. First unscrew the back of your Tamagotchi. When you unscrew it you should be able to see the battery and four little screws. unscrew those too. You should be able to see a lot of stuff on a green panel. Look for two semicircles, and color them in with a lead pencil. put your Tamagotchi back together now. You know when you did this successfully when you see the Tama-Egg shaking. You should now be able to speed up time with the c button, choose your characters, and lots more stuff.

Answer 4

basically, you unscrew the back of the tamagothi, so you see a battery.

In the corners, there are four more little screws

unscrew those, and take out the battery.

near the battery slot, there may be a little word that reads Debug.

under that there should 2 little white semicircles.

get a normal pencil and connect the 2 semicircles by drawing between them., and then put the whole thing back together again.

I personally wouldn't recommend doing it...but if you really want to, go ahead!

just keep in mind it will never go back to normal :(

Answer 5

Debugging, done manually by anyone, begins with opening the rear panel of the Tamagotchi and removing the rear of the main shell. On the back of the circuit board, near the battery, are two foil semicircles wth DEBUG written above. Using a pencil, owners draw a line between the two half circles to connect them. Upon re-assembling the Tamagotchi and restarting it, all of the immediate effects take place.You can also depress the circle, but I have not tried that. Hyperspeed, as named by fans, is a process that starts as soon as the debug program begins. Minutes are turned into seconds, and the Tamagotchi moves and operates at breakneck speed. To be exact, every second 15 minutes passes in this mode. This can be turned on or off with most Tamagotchi releases with the C button. However, it cannot be turned off with the V4, V4.5, and V5 as pressing C will make Tamagotchi come up close. V5's debug cannot be turned off becase there is a c button reaction. Character Selection is an effect if the owner hatches a new Tamagotchi after debugging. As soon as the baby appears, the owner can press A and scroll through characters programmed into the Tamagotchi, able to gain access to previously unobtainable or difficult to obtain characters. Debug Removal is a process used to turn off the Debug program and return the Tamagotchi to its formal state. This is done by re-opening the Tamagotchi and erasing the drawn line (either by eraser or the end of a flathead screwdriver). The effect is not always immediate, and some Tamagotchi pets jolt into Hyperspeed mode for no reason. Sometimes when the Tamagotchi has not been undebugged, it stops being debugged for a short period of time Known Issues Among Releases Some Tamagotchi releases, though possible to be debugged, have negative side effects when debugged. The Tamagotchi Connection Version 3 and Tamagotchi Connection Version 4, for example, lose PC access (not the V4.5), though it's unknown if the same can be said for the internet-based Japanese releases, Chou Jinsei Enjoi Tamagotchi Plus and Ura Jinsei Enjoy Tamagotchi Plus. The Tamagotchi Connection Version 4 and V4.5 also cannot turn off Hyperspeed.

From Tamagotchi Wiki

Answer 6

no one has yet discovered how to debug a tamagotchi music star (V6) so it is impossible at the moment

Answer 7

it allows you to choose your character, speed up time and aging, and lots of other stuff. (just be careful if you decide to debug it!)