All Distributors rotate clockwise. Full size Blazer with 5.7 L V8 is 1-8-4-3-6-5-7-2 All Distributors rotate clockwise. S10 Blazer engines: 2.5L = 1-3-4-2 2.8L = 1-2-3-4-5-6 4.3L = 1-6-5-4-3-2
i am looking for a diagram of the firing order in a 1997 Chevy s10 blazer 4x4.
18436572
1-8-6-5-4-3-7-2- firing order is number 1 should point at number 1 cylinder.than go clockwise from there.
The firing order for a 1994 S-10 Blazer with a V6 engine is 1-6-5-4-3-2. This order is crucial for the correct operation of the engine, ensuring that each cylinder fires in the proper sequence. If the engine has a different configuration, such as a 4-cylinder, the firing order may vary. Always refer to the vehicle’s service manual for the most accurate information.
Go to any Auto parts Store and get the book for your year, make, and model and check the firing order for you vehicle. You may have a spark plug wire hooked wrong to the distributor...
The Chevy Blazer with a 4.3l engine has a firing order of 1-6-5-4-3-2. The number one cylinder is on the driver side closest to the front of the Blazer.
165432
165432
18436572
are the plug wires in the correct sequence for firing order? Are the coil wires all connected? Did you remove the distributor and possibly put it out of time?
The firing order for the 2004 Chevy Blazer with a 4.3L V6 engine is 1-6-5-4-3-2. The cylinders are arranged in a V configuration, with cylinder 1 located at the front of the engine on the passenger side. The firing order follows a specific sequence to ensure smooth operation and balance. It's important to follow this order when replacing spark plugs or performing ignition system repairs.
18436572