You first have to know the type of power supply your are testing. Then you could test whether the power supply is receiving anything from its source. Next check if it is giving any output.
Remove and replace the power supply.
For a god quality PC power supply; 120mV on the 12V rail 50mV on the 5V and 3.3V rails
UPS = Uninterruptible Power Supply
If you want it to work, it should be on I, if you want to turn it off it should be on 0.
To keep the power supply cool. If there were no fan the power supply would overheat and fail.
Voltage settings on the back of the power supply should be checked
Earl Crandall has written: 'Power Supply Testing'
any power supply with at least 175 watts
That depends on what you're testing it for. You would mostly use the volt meter settings to test for proper voltage output at the connectors coming out of the power supply. After verifying the expected volt output from a suspect connector, You should, in case you are wrong or a short is present, start with the highest voltage AC settings first and then reduce to lower settings and DC to confirm proper outputs.
No attempt should be made to repair the power supply. The power supply should be replaced with a power supply of equal or greater wattage.
infact i think the power supply be replaced with new one. infact i think the power supply be replaced with new one.
The type of power supply being used (AC or DC) should match the power requirements of the device it will be supplying power to.
Remove and replace the power supply.
The power supply should be disconnected first. Then comes the CPU cooler. Then the processor can be safely removed from the socket.
the power supply whines when you first turn on the system
no you should not. You connect it to the PS1 power connection
It would be possible if you have the proper testing equipment and electrical tools to do the job.