0
What is the frequency of the waves if it takes 5.0 seconds to generate 10 compressions?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
It takes 5 seconds for a wave with a wavelength of 0.4 m to travel past you What is the frequency of the wave?
0.2 HZ
What is the period of a 1000 Hz signal?
The period of a 1000 Hz signal is the time it takes to complete one cycle or revolution of the signal. The formula to calculate the period from the frequency is: T=frac1f where T is the period in seconds and f is the frequency in Hertz. Plugging in the given frequency of 1000 Hz, we get: T=frac11000 T=0.001 Therefore, the period of a 1000 Hz signal is 0.001 seconds or 1 millisecond. This means that one cycle of the signal repeats every 1 millisecond. You can also use this online calculator to convert between frequency and period.
What is the frequency of an oscilloscope trace?
In order to find the frequency of an oscilloscope trace, you must first find the period, which is the time it takes for one oscillation, which can be found by measuring the amount of time from one peak our trough to the next. The frequency is the number of oscillations per second, and can be found by dividing 1 by the period in seconds.
How the frenquency of a wave changes when a period of the wave increases?
The frequency of a wave decreases when its period increases. The frequency (f) of a wave is the number of cycles (or vibrations or oscillations) per unit time. The SI units of frequency is the inverse seconds or hertz (Hz). The period (T) of a wave is the time it takes to complete a cycle. The frequency and period have the following relationship: frequency= 1/period f= 1/T so if the period increases, the frequency decreases.
What is the period of a pendulum that takes 3 seconds to move forward and another 3 seconds to come back'?
The period is the time taken to complete one cycle. In this case it would be three seconds. The frequency of the swing is the inverse of the period. 1/3Hz
What takes the most energy to generate microwave or ex ray?
An X ray takes more energy to generate because it is higher frequency (second in shortest wavelength only to gamma rays). Microwaves are just higher frequency radio waves.
What is the frequency of a wave that takes 5.0 Sec?
If it takes 5 seconds for one whole wave to pass you, then its frequency is 1/5 wave per second, or 0.2 Hz.
It takes 5 seconds for a wave with a wavelength of 0.4 m to travel past you What is the frequency of the wave?
0.2 HZ
What is your frequency?
Frequncy is the speed of an electrical wave through a conducting material.for example a wave of frequency 50 Hz takes 20 milli seconds(1/50) to complete one cycle.
What is the maximum frequency that can be generated using mode 1 if the crystal frequency is 11.0592MHZ?
mode-1(16-bit timer) i.e to run the timer from 0000 to ffff(hex) it takes 71milli seconds maximum in one cycle. but u can generate what ever the delay you wish on 8051. formula is (required delay/71ms)=x. now repeat the the above loop for x times you can get your desired delay.
What's the signal's frequency if it takes .025 seconds to complete 1 cycle?
f=1/T so f = 1/.025 =40Hz
What MHz and GHz measure?
MHz and GHz are a measure of frequency. In science frequency = 1/time for one cycle. If a wave takes 0.5 seconds to complete a wave, the frequency is 2 Hz. MHz and GHz in computers measure the same thing. It measures the frequency of the processor (ie, how many cycles it completes in a set time) again, if each cycles takes 0.5 seconds, then your computing speed is 2 Hz. a GHz (giga hertz) is equal to 1000 Mhz (mega hertz) a MHz is equal to 1,000,000 Hz. how is mhz and ghz is measured?
What is the CPR compression ratio for infants?
The New Compression Rate is 30 compressions for every 2 Breaths. This is for Adult, Child, and Infant True, how ever if you have 2 rescuers then the ratio is 15 compressions the two breaths for infant and children. For a single person, lay rescuer: Do 30 compressions to 2 breaths. If you haven't got EMS/ambulance already do 5 sets (about 2 minutes) before leaving to make the phone call - unless someone else can make the call. Then return and do as many sets as needed until the ambulance crew takes over.
If a sound wave is traveling 2.5 meters and it takes 0.0073 seconds what is its frequency and wavelength?
There isn't enough information in this question. You can calculate the speed of the wave (distance divided by time), which is the frequency times the wavelength. But you still need one of them to find the other.
What is the period of a 1000 Hz signal?
The period of a 1000 Hz signal is the time it takes to complete one cycle or revolution of the signal. The formula to calculate the period from the frequency is: T=frac1f where T is the period in seconds and f is the frequency in Hertz. Plugging in the given frequency of 1000 Hz, we get: T=frac11000 T=0.001 Therefore, the period of a 1000 Hz signal is 0.001 seconds or 1 millisecond. This means that one cycle of the signal repeats every 1 millisecond. You can also use this online calculator to convert between frequency and period.
Do you think AI Writer tool can Generate Quality Content?
There are so many writing tools that can help you generate content but Simplified's AI Writer helps you generate long-form content like blog articles and video scripts in minutes. Writing a 500+ word article takes less than 30 seconds.
What is the frequency of an oscilloscope trace?
In order to find the frequency of an oscilloscope trace, you must first find the period, which is the time it takes for one oscillation, which can be found by measuring the amount of time from one peak our trough to the next. The frequency is the number of oscillations per second, and can be found by dividing 1 by the period in seconds.
