answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2008-02-09 22:31:36

The recommended fuel/oil ratio for a 1972 model 65hp Mercury is 50:1, roughly six gallons of fuel to one pint of2 cycle oil.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions



A 4hp Mercury outboard requires a 50:1 fuel to 2 cycle oil mix.


I have a 1999 Mercury 2stroke 5HP outboard and the owners manual states 50:1 Gas/Oil mixture.


I have a 1972 85esl72 Johnson outboard motor and I use a 50:1 ratio.


For the Mercury 9.9 Two Stroke Engine it is 50:1...


The 7.5 hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.


Mercury outboards prior to 1966 use a 24:1 fuel to oil ratio.


A 50hp Mercury outboard, requires a 50:1 fuel to 2 cycle oil ratio, roughly one pint of 2 cycle oil, to six gallons of fuel.


The 120 hp, Force / Mercury outboard, requires a 50:1 ratio, one pint of 2 cycle oil to six gallons of fuel.


The 2.5 hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.


A 115hp Mercury outboard boat motor has a fuel to oil ratio of 50 to 1. This translates to 16 ounces of 2-cycle oil to every 6 gallons of fuel.



The 1981 model 9.8 hp Mercury outboard requires a 50:1 ratio, this is roughly 1 pint of 2 cycle oil, to 6 gallons of fuel.


50:1 ratio which is 1 pint to 6 gallon of fuel


A 3.3 hp Mercury outboard for 2007, requires a 50:1 fuel to oil mix. This is roughly 1 pint of 2 cycle oil, to 6 gallons of fuel.


An 1985 model, 25 hp Mercury outboard requires a 50:1 fuel, to 2 cycle oil ratio.


The 1973 model, 7.5 hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.


The 1978 model, 115 hp Mercury outboard requires a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.


The required fuel/oil ratio for the 98 model, 25 hp Mercury outboard is 50:1. This is roughly one pint of 2 cycle oil, to six gallons of fuel.


If not using the oil injection system, a 150hp Mercury outboard would require a 50:1 ratio. This is roughly, one pint of 2 cycle oil, to six gallons of fuel.


I have a 1984 90hp Mercury outboard and the fuel mixture is 50:1 which is one pint of 2 cycle motor oil for every 6 gallons of gas.


I would assume 50:1 but call the manufacturer to confirm


A 35 hp Mercury 2 stroke, requires a 50:1 ratio, one pint of 2 cycle oil to six gallons of fuel.


Mercury outboards, 1966 and up, require a 50:1 ratio, one pint of 2 cycle oil, to six gallons of fuel.


The 1987 model, 50 hp Mercury outboard requires a 50:1 ratio, mix one pint of 2 cycle oil, to six gallons of fuel, or 3 ounces of oil per gallon of fuel.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.