34-40 PSI (Pounds per Square Inch)
Application: Key on engine off all engines
37-41 PSI (Pounds per Square Inch)
Application: Key on engine running 2.0L only
30-45 PSI (Pounds per Square Inch)
Application: Key on engine running 2.5L only
39-=43
i don't know about a probe forsure but is in the trunk on a tompo or topaz on th left side near the top
Were do I locate the fuel filter on a 1993 Ford probe 4 cylinder
65 pounds of feul pressure
21 city / 28 highway ( miles per U.S. gallon ) according to fuel economy . gov
On a 1994 Ford Probe, the fuel pump is located inside the fuel tank. To access it, you typically need to remove the rear seat and lift the access panel or, in some cases, drop the fuel tank entirely. Make sure to relieve fuel system pressure before attempting any repairs or replacements.
To test the fuel pump on a Ford Probe, first ensure the ignition is off and disconnect the negative battery terminal. Then, locate the fuel pump relay and check for proper operation by swapping it with a similar relay from another system. After that, use a fuel pressure gauge to connect to the fuel rail's test port, turn the ignition to the "on" position (without starting the engine), and check the pressure reading against the manufacturer's specifications. If the pressure is low, the fuel pump may need to be replaced.
Absolutely not.
Most are in the fuel tank or above the tanks.
in the fuel tank
it is located inside the fuel tank
It is Inside of the fuel tank.