Well, it is Serial Advanced Technology Attachment. Hard Disk Drive.
bus interface
sata cable has how meny wires inside
SATA
full for of ata sata
sarita also tiger also
You can only have 1 Sata HDD per Sata connector, however on IDE you can have 2 IDE, 1 set to master the other to Slave or if supported both set to CSS (Cable Select). So you can have 4 Sata HDD and 2 IDE HDD per IDE channel. One thing you need to be aware of is your Power Supply. Make sure it is capable of handling such a load or you will get write errors on the Drives. Hope that helps.
No (EIDE only)
HDD stands for Hard Disk Drive which is what your computer stores information on. SATA is a type of connection that powers and transmits data inside of your computer. It works in the same fashion that the older IDE/PATA standard did.
I like Newegg.com or Tigerdirect.com
Connect new hdd and check for proper jumper connection. Configure both HDD to master and slave if they are connected using same IDE cable or if they both have different set of IDE cables, then just connect the HDD and provide power cable from SMPS.. Similar for SATA HDD
make sure the old hdd uses SATA... SATA is the standard data cable/rate for all new computers.
Two Internal HDD connections Include SATA and eSATA with eSATA being newer and much faster.