The controller card, or simply "controller," is a piece of hardware that acts as the interface between the motherboard and the other components of the computer. For example, hard drives, optical drives, printers, keyboards, and mice all require controllers to work. Most computers have all the necessary controllers built in the motherboard as chips, not full-sized cards. However, if you add additional components such as a SCSI hard drive, you may need to add a controller card as well. Controller cards are typically installed in one of the computer's PCI slots.
An IDE (Integrated Drive Electronics) is the controlling interface for the hard disc or optical drive (CD ROM etc.). The controller was integrated (hence the name) into the hard disc unit rather than being mounted on the computers motherboard. The first IDE units appeared in 1986 and has been replaced by the ATAPI (SATA) drives today.
Controls RAID configuration in servers.
CDROM drives dont normally require a "driver card" as they are IDE devices which plug into the motherboards built-in IDE controller.
Both devices are jumpered as master Both Devices are jumpered as Slave
3F0 - 3F7Primary floppy disk drive controller. Primary IDE controller (slave drive) (3F6-3F7h)
it has 2 IDE controller
A video controller, or video card and graphics card as they are now more commonly known, is an expansion card whose function is to generate and output images to a display. When referring to early machines, the card is sometimes referred to as a video controller or graphics controller, when the cards were typically integrated onto the motherboard itself.
A video controller, or video card and graphics card as they are now more commonly known, is an expansion card whose function is to generate and output images to a display. When referring to early machines, the card is sometimes referred to as a video controller or graphics controller, when the cards were typically integrated onto the motherboard itself.
PCI IDE card allows connecting IDE hard drives and CD/DVD drives if a motherboard is missing or has not enough IDE ports.
If replacing the optical drive on a primary IDE controller, it is important it is compatible with the CD Rom drive. The IDE data cable must be connected and you must have the power cord plugged in.
14
4
if your refering to IDE or SATA controller mostly likely using IDE or Sata ports on the board else u could go external by USB disk controller is recognised in BIOS under an IRQ
IDE (Integrated Device Electronics) is a standardized interface for data storage devices in computer systems. It is so named because much of the logic circuitry is integrated into the device itself. IDE is most commonly used for hard drives and CD or DVD drives, but has also been used for tape drives and zip drives. An IDE controller is the primary interface (usually integrated into the motherboard) which any IDE devices will be plugged into. It handles the flow of data to and from these devices. It usually consists of two connections (known as IDE channels) both of which can handle up to 2 devices each. It is also possible to add more IDE controllers in the form of PCI or PCI-E cards, these are usually referred to as IDE controller cards. This is often done to enable more storage devices to be installed into the system, but may also be done to replace an obsolete or malfuntioning on-board IDE controller.