Riser Should be Design by taking the idea of solidification time of casting,design should be in such a way that it solidifies after casting to produce sound casting.and it is done by making the volume to area ratio higher than the casting. Waseem Amwar UET peshawar
Most metals are less dense as a liquid than as a solid so castings shrink upon cooling, which can leave a void at the last point to solidify. Risers prevent this by providing molten metal to the casting as it solidifies, so that the cavity forms in the riser and not the casting.
Runner : A channel through which molten metal or slag is passed from one receptacle to another; in a mold, the portion of the gate assembly that connects the downgate or sprue with the casting ingate or riser. The term also applies to similar portions of master patterns, pattern dies, patterns, investment molds and finished castings.Riser : Reservoir of molten metal from which casting feeds as it shrinks during solidification.
Riser
A riser that has a curved shape at front.
LPX or mini LPX uses a riser card ( also called a bus riser or daughter card). LPX motherboard has the riser card near the center, whereas the NLX motherboard has the riser at the edge of the board.
Ronn Riser was born in 1962, in USA.
trade and riser are the terms used for stair case. trade is used for the breadth of and riser is used for height of stairs.
Neil Riser was born on 1962-04-25.
Paul Riser was born on 1936-08-15.
also called: bus riser daughter card
Dry Riser - song - was created in 1994-01.