The function of the mirror located under the scale is to ensure that it does not touch the ground. This will result in inaccurate results and should be avoided at all costs.
As you read the meter, you're supposed to line up the needle with its image in the mirror. When you do that, you know you're looking at it exactly perpendicular to the numbers, not on a slant. That eliminates the possibility of introducing an error into your reading because of "parallax".
when the converging ray of light do not meet at a point, it moves parallelly then under this condition does concave mirror behaves as a plane mirrror.
Something that weighs under a gram might be in the milligram department, so basically, any scale that measures in milligrams will do.
The Mirror
The support force of your scale is the same as your weight, but in an upward direction. If that were not so, the scale would be deformed (dented in) under your weight.
As you read the meter, you're supposed to line up the needle with its image in the mirror. When you do that, you know you're looking at it exactly perpendicular to the numbers, not on a slant. That eliminates the possibility of introducing an error into your reading because of "parallax".
Controls the day/night function and alarm status.
On most vehicles, there will be nuts or bolts inside the door the mirror is located on, but under the door panel. If there is a triangular panel separate from the door panel, they may be under this. Otherwise, you will have to remove the door panel to access them.
i believe it is near the driver side rear-view mirror under the hood. it is under neath the air filter hose
The A/C blower motor is located under the dash board, passenger side behind the glove compartment. You can see the motor housing by using a mirror and flashlight. Hold the mirror on the floor board and shine the flashlight onto the mirror while moving the mirror around. The "end" of the blower motor looks like one half of a ball.
The fuse for the side view mirror on a Chrysler 300m is located under the driver's side dash, near the floor. It adjust the mirrors when driving in forward or reverse.
when the converging ray of light do not meet at a point, it moves parallelly then under this condition does concave mirror behaves as a plane mirrror.
Use the Split function which is located under the Preview pane.
a CD or a Mirror. and why?
There is a panel under the steering wheel. You will need to get under there and unscrew the screws keeping it in place. Also, remove the ring on the remote cable mirror lever. The fuses are under the panel.
teloport by using the mirror.
Rh under mirror...