The main wire in a bulb is the filament - which gets hot enough to give out light without burning away - and there are two other wires to take electricity to and from that filament.
The function of a light bulb in an electric circuit is that it turns electrical energy into light.
A light bulb connected between to wires, each having 300 volts to ground that are in phase, will not light, because there is no differential voltage available to do any work. If each wire has 300 volts to ground and are out of phase (600 volts between them) the light bulb will be lit, if it is rated at least for 600 volts, otherwise it will burn out.
Cancels the noise.
An battery to light and back or Wires to TV and back.
The function of any ballast in a lighting fixture is to raise the voltage high enough to strike an arc through the bulb or tube.
metal casing and tip of the bulb are connected to the circuit which allows electricity to flow through the wires and light up the bulb
you can take thin wires up to a relay then run thicker wires to lights or do you mean a bulb fail relay.
The function of connecting wires is allowing currency to flow through in order to have a complete circuit
No. Or at least not perceptually. The wires only supply electricity to the bulb - the bulb is what limits the current.
by shorter wires or thiker wires
use to cut wires piste
A filament.
The bulb won't work.
the wires to the bulb is one reason among others. the wires to the bulb is one reason among others.
the function of an bulb is it to light up
bulb , bulb holder , wires and bataries are main compoments of a circuir
The function of a light bulb in an electric circuit is that it turns electrical energy into light.