It is around the metal glue tube.
An electric current heats a metal tube that the glue is forced through.
the heating element is gone out
The wire in the cord has much lower resistance than the heating element. The heating element is a resistive or resistance heating element. Resistance in the quality of a substance or material that causes it to limit current flow, and it get heated up in the process. The heating element has all but the smallest fraction of the resistance in the circuit, so the heat, that thermal energy that get the water hot, is generated by the resistance of the heating element.
Yes, the stick changes from solid to liquid momentarily.
It could be caused by a damaged heating element. You should have the heating element checked by a professional. Try cleaning the dryer first. Remove lint clogging the exhaust vent. Overheating in the washer might cause the heating element to shut off safely. Also check if the dryer is plugged correctly.
An electric current heats a metal tube that the glue is forced through.
if you leave a hot glue on overnight --- the glue gun stays on all nightANS 2 - All the glue will get really liquid and leak out and the heating element may burn out.
No, not the glue itself, however the gun can over heat in the process of heating the glue and spark, so if there was anything flamable nearby it could spark a fire, yes.
Yes when heated with a hot air gun or heating element.
No, you cannot use a solder gun as a hot glue gun.No, you cannot use a solder gun as a hot glue gun.
Turn the glue gun on to loosen the glue, then, if the glue is persistent, use a wooden stick to CAREFULLY pick the glue off.
Glue is a compoud.
you can glue stuff
Glue stick.
No it is not.
Glue guns are designed to heat up hot glue for craft projects. The glue gun warms up special glue sticks, and makes it easier to apply this glue to the right place in the projects.
the element has a open in it !