It depends on the country you're in (what codes apply), local utility standards, land being crossed (is it hilly?), type of structure/configuration of wires, and the distance between towers. At its' lowest point, the conductor could hang ~25 feet off the ground.
Usually around 50-70m Height. Check AS3000 for regulations
the general height 34-38 mtrs
40
40meter
KV is the abbreviation for kilovolts. The prefix kilo means thousands, so 220 kv means 220 kilovolts, or 220,000 volts.
220 KV lines used in Kerala have a capacity of 880 Amps
Its just a matter of standard. In my area, for instance, we use 13.2 KV for distribution lines, and 69 KV / 138 KV for transmission lines.
16
A: Its purpose is to correct the power factor of the line.
KV is the abbreviation for kilovolts. The prefix kilo means thousands, so 220 kv means 220 kilovolts, or 220,000 volts.
The lower-case 'k' in 'kV' (not 'kv') is a multiplier, representing 'kilo', meaning 'a thousand times', and the upper-case 'V' represents 'volts', the SI unit for potential difference. So a '220-kV' cable has a line voltage (voltage between conductors) of 220 kV.
220 KV lines used in Kerala have a capacity of 880 Amps
220 kV
220 volts, 110 volts, 440 volts, 400 volts, AC or DC voltage. High voltage like - 220 KV, 400 KV, etc
The bell is 2.28 m tall
i working 66 kv and 220 kv substation. over substatin transformer and 66 kv sf6 bracker use i intersted for working of idmt realys with breacker tripping coil.
i working 66 kv and 220 kv substation. over substatin transformer and 66 kv sf6 bracker use i intersted for working of idmt realys with breacker tripping coil.
Its just a matter of standard. In my area, for instance, we use 13.2 KV for distribution lines, and 69 KV / 138 KV for transmission lines.
yes,, because, the diaelectric strength of air is 35 kv/cm, above it, air start conducting. at 220 kv current wil start flowing through human body.
16
A: Its purpose is to correct the power factor of the line.