The closest the flame appears to the fuel supply.
LPG is liquid petroleum gas and oxy-acetylene is oxy fuel welding. The LPG can be used as an alternative to oxy-acetylene and is cheaper and can be purchased in bulk. The oxy-acetylene is best used when making shorter, thinner, and faster cuttings.
It depends on where the gas is leaking. If it is from the regulator connection sometimes just readjusting and tightening the grooved nut will stop the leak. Turn off the valve and remove the regulator. Check for dirt particles and damage to the seat and regulator bulb (the fat part that fits against the seat), open and close the valve quickly to blow out any loose particles, reattach the regulator. Check to see if the gas is still escaping. If it is, the regulator bulb or the valve seat may be damaged. All cylinders have a fuseable plug and if it is leaking from there evacuate the area immediately and call emergency personnel. If it is from the valve area you may be able to stop the leak by tightening the packing nut at the base of the valve stem. With the regulator attached open the cylinder valve slightly and tighten the packing nut. Check to see if this stops the leak. If immediate attempts fail, evacuate the area.
A turbo torch is is a welding tool used in the HVAC (Heating, Ventilation and Air Conditioning) field. The torch can use propane or oxy-acetylene gas to provide a high temperature flame.
because the refrigerator keeps it fresh and at one temperature. the counter changes temperature. Acetylene gas in the confinement of refrigerator hastens the browning process in banana.
Acetylene is a covalent compound
Acetylene is a neutral compound.
Acetylene has a linear molecule.
Acetylene, C2H2, is a pretty simple hydrocarbon. http://en.wikipedia.org/wiki/Acetylene
Acetylene - album - was created in 2005.
Acetylene
Acetylene is C2H2 so its emperical formula is C1H1.
In normal usage in an oxy/acetylene cutting torch, the acetylene hose is red and the oxygen hose is green.
Acetylene is a gas at standard temperature and pressure.
probably 92.3% of carbon is present in acetylene..