What is the input output fault finding technique?
Its fairly self explanatory, put the input IN then check the output at the OUTPUT.
in feedback the part of systems output is returned as its input to the system is known as feedback.It helps in finding deviation in the output and control standard and report it to the input.it helps in taking corrective measures so it can be negative or positive. === 1.Input====2.processor===3.output=====1.input
There are lots of possible rules. The simplest is: output = input + 13 However all the following will also work: output = 33 - input output = 2.3 x input output = 230 / input output = 73 - 5 x input output = 2 x input + 3 The above is only a small number of the many, many, many rules which meet the criteria of input of 10 giving an output of…
In order to find out stack fault of a three input NAND gate how many necessary input vectors are needed?
The Output is stuck at either '0' or '1'? O/P Stuck at - '1': One input combination is enough (All 1's). So that output should transition from '1' to '0'. O/P Stuck at - '0': 7 combinations possible (000, 001, 010, 100, 101, 110). But only one is enough. Output should transition from '0' to '1'. So 2 input vectors necessary to verify the three input NAND gate stuck fault.
What is the difference between output and input? If you sing into a microphone you can hear the microphone's output. Sound coming out of the power amp to the speakers. That is the input of the loudspeaker. Do you see the difference? Your voice is the microphone's input. Its output is electrical impulses that are input to the amplifier. The amplified impulses are the output of the amplifier and input to the speaker. Sound waves…