helium
A cat can get stuck in a lamp if it crawls inside the lampshade or lamp base and is unable to find its way out due to the narrow spaces and obstacles inside the lamp.
The independent variable of a lava lamp experiment could be the temperature of the lamp, the type of wax or liquid inside the lamp, or the amount of time the lamp is switched on.
An Argand lamp is a lamp with a circular hollow wick and glass chimney which allows a current of air both inside and outside the flame.
The filament used in a fluorescent lamp is made of a coated tungsten coil. When electricity passes through the coil, it excites the mercury vapor inside the lamp, producing ultraviolet light that then interacts with the phosphor coating on the inside of the lamp to produce visible light.
A lava lamp will work better in hot water because the heat helps the wax inside the lamp melt and flow more easily, creating the lava lamp effect. Cold water may make the wax inside the lamp too thick and slow-moving, resulting in a less pronounced lava lamp effect.
The blobs inside a lava lamp are heated by a light bulb at the base of the lamp, causing them to rise and fall. When the cap is placed on the lamp, it traps the heat inside, allowing the blobs to continue moving as the wax melts and cools down. This creates the iconic lava lamp effect even with the cap on.
Water, wax, and carbon tetrachloride.
A lava lamp contains a special wax mixture, usually made of paraffin wax, mineral oil, and dye. When the lamp is heated by a light bulb at the base, the wax melts and floats around in the liquid, creating the mesmerizing lava-like effect.
The variables in a lava lamp include the type and amount of wax and liquid, the temperature of the lamp, and the presence of air bubbles. These variables interact to create the mesmerizing motion and flow of the wax inside the lamp.
When you add food coloring to a lava lamp, it will disperse and blend with the wax and liquid inside the lamp. As the lamp heats up, the colored wax will rise, mix, and create vibrant swirling patterns in the lamp.
No, a lava lamp is not a reversible change. The melting and mixing of the wax and oil inside the lamp is a physical change that cannot be easily reversed to its original state.
No, it is not necessary to remove the bottle cap from a lava lamp. The bottle cap is meant to secure the liquid inside the lamp and should remain in place while the lamp is in use.