172.16.0.0. The first ip address within this subnet is 172.16.0.1
IP address 172.31.0.016 is a Class B private address so the subnet mask is 255.255.0.0.
172.16.0.0 is the Network Number for Class B Private IP Address based Network.
The default subnet mask would be 255.255.0.0
172.16.192.166/29
255.255.255.0
172.16.0.1.
Class B
255.255.255.0
To determine the network or subnet address of an IP address
no
What is the default subnet mask for an IP address of 198.133.219.4?
Subnet Mask provides Network & Class Identificationfor an IP Address.
Depends on the subnet. For the subnet of 192.168.1.0, the first usable IP address is 192.168.1.1. This is typical of a default wireless router setup. Valid usable IP addresses under this scenario is 192.168.1.1 to 192.168.1.254.
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
Yes. You need to have an IP (either static or dynamic) You must have a subnet mask that corresponds to the IP address; and a gateway IP address that is on the same subnet.
The correct term is subnet mask instead of subnet mass. A subnet mask separates an IP address into the host address and the network address. It is a 32-bit number that can mask an IP address.
192.168.12.0
Example IP address of 192.168.1.123 with a subnet mask of 255.255.255.0
If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.
Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.
Depends on how you subnet it.
The subnet mask would be 255.255.255.0
That depends on the subnet's subnet mask.
what is the subnet mask for this hst IP prefix format ? Host IP Address: 183.91.104.16