0
172.16.0.0. The first ip address within this subnet is 172.16.0.1
Wiki User
∙ 16y ago
Wiki User
∙ 15y agoIP address 172.31.0.016 is a Class B private address so the subnet mask is 255.255.0.0.
Wiki User
∙ 15y ago172.16.0.0 is the Network Number for Class B Private IP Address based Network.
Wiki User
∙ 14y agoThe default subnet mask would be 255.255.0.0
Wiki User
∙ 13y ago172.16.192.166/29
Wiki User
∙ 12y ago255.255.255.0
Wiki User
∙ 12y ago172.16.0.1.
Wiki User
∙ 10y agoClass B
Add your answer:
Earn +20 pts
What is the default subnet mask for an IP address of 198.133.219.4?
255.255.255.0
What is the purpose of subnet mask?
To determine the network or subnet address of an IP address
What is the Net ID of an IP Address of 18.9.25.3 with Subnet Mask of 255.0.0.0?
no
What is the default gateway address for 192.133.219.0?
What is the default subnet mask for an IP address of 198.133.219.4?
What does the subnet mask of an IP address do?
Subnet Mask provides Network & Class Identificationfor an IP Address.
What is the first valid address on a subnet?
Depends on the subnet. For the subnet of 192.168.1.0, the first usable IP address is 192.168.1.1. This is typical of a default wireless router setup. Valid usable IP addresses under this scenario is 192.168.1.1 to 192.168.1.254.
What is the IP of the router that connects to this router?
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
Do Three major fields have to be configured for TCP IP the IP address the subnet maskand the default gateway?
Yes. You need to have an IP (either static or dynamic) You must have a subnet mask that corresponds to the IP address; and a gateway IP address that is on the same subnet.
What is a subnet mass number?
The correct term is subnet mask instead of subnet mass. A subnet mask separates an IP address into the host address and the network address. It is a 32-bit number that can mask an IP address.
What is the subnet ip address of this ip address192.168.12.135?
192.168.12.0
Example of ip address and subnet mask which represents a Host address of decimal 123?
Example IP address of 192.168.1.123 with a subnet mask of 255.255.255.0
How do subnet masks indentify that a network has been subnetted?
If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.
Do you share your IP address with other internet users in your house who use the same wireless internet 'network' as you?
Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.
What is the network address of 68th subnet for IP 10.15.8.36?
Depends on how you subnet it.
What would the subnet mask be if the first 24 bits of the ip address represent the network id?
The subnet mask would be 255.255.255.0
What is the broadcast address for the host IP of 172.16.66.021?
That depends on the subnet's subnet mask.
What is the subnet mask for 195.70.16.93 in IP prefix format?
what is the subnet mask for this hst IP prefix format ? Host IP Address: 183.91.104.16
