Example of ip address and subnet mask which represents a Host address of decimal 123?

How you create subnet id for a particular id?

To create a subnet ID, you start with the network's base IP address and subnet mask. The subnet mask determines how many bits are allocated for the network and how many for the hosts. By applying the subnet mask to the base IP address, you can identify the subnet ID, which represents the network portion of the address. For example, if your base IP is 192.168.1.0 with a subnet mask of 255.255.255.0, the subnet ID is 192.168.1.0.

What is the broadcast address on IPv4 networks?

The broadcast address on IPv4 networks is the subnet address, padded on the right with ones. For example, if the subnet address is 192.168.x.y, with a subnet mask of 255.255.0.0, then the broadcast address is 192.168.255.255.

What are the first four addresses in the 192.168.1.64?

The first four addresses in the 192.168.1.64 subnet, assuming a typical subnet mask of 255.255.255.0 (or /24), are 192.168.1.1, 192.168.1.2, 192.168.1.3, and 192.168.1.4. These addresses are usable for devices within that subnet. The address 192.168.1.64 itself typically represents the network address for that subnet and is not a usable host address.

How do subnet masks indentify that a network has been subnetted?

If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.If (for example) the first 20 bits of the subnet masks are "1", then any IP address that shares the same 20 bits with the IP address of my computer is in the same subnet.Note that a subnet only indicates the size of the current subnet, the subnet in which your computer (for example) is located. Other subnets of a network may have different sizes; this can't be ascertained just by looking at you IP address and subnet. Nor is it relevant for your computer: The computer only has to know that anything outside the subnet has to be sent first to the default gateway - the server or router that connects your subnet to the remainder of the net.

Which dotted decimal number is used to distinguish the network portion of an IP address from the host portion?

Subnet mask

Which dotted decimal number is used to distinguish the network portion of an ip address from host portion?

subnet masks

How do an IP address and its subnet mask function together?

The subnet mask - expressed in binary - starts with a number of ones, followed by zeros. If (for example) the subnet mask is 255.255.255.0, this can also be written as /24 - that means that the first 24 bits are ones. In this example, that means that the first 24 bits of the IP address (in this case, exactly 3 bytes) are shared by all devices in the same subnet. So, if your IP address is 200.3.85.7, and the subnet mask is 255.255.255.0, all other computers in the same subnet will also start with 200.3.85.

What does address 192.1.6.255 signify?

In a 24 bit subnet (subnet mask = 255.255.255.0), the address 192.1.6.255 is the broadcast address for the subnet 192.1.6.0/24.

What is subnet address if the destination address is 198.47.34.31 and sunet mask is 255.255.244.0?

To find the subnet address, perform a bitwise AND operation between the destination address (198.47.34.31) and the subnet mask (255.255.244.0). In binary, the destination address is 11000110.00101111.00100010.00011111 and the subnet mask is 11111111.11111111.11110100.00000000. Performing the AND operation results in the subnet address of 198.47.32.0.

What is the subnet mask for 195.70.16.93 host in dotted decimal format?

To determine the subnet mask for the IP address 195.70.16.93, we need to know the specific subnetting used, as the subnet mask is not inherently defined by the IP address itself. However, a common subnet mask for a Class C address like this one is 255.255.255.0, which allows for up to 256 IP addresses within the subnet. If the network requires a different subnetting scheme, the mask could vary accordingly.

What is the subnet mask if the ip address is 150.1.1.0?

The subnet mask for the IP address 150.1.1.0 depends on the specific subnetting scheme in use. However, if we consider it as a default Class B address, the default subnet mask would be 255.255.0.0. If subnetting is applied, the mask could vary based on the number of subnet bits used. For example, if it's subnetted into smaller segments, it could be 255.255.255.0 (for a /24 subnet).

How do you find a subnet on a windows machine?

To find a subnet on a Windows machine, open the Command Prompt by typing "cmd" in the search bar and pressing Enter. Then, type the command ipconfig and press Enter. Look for the "IPv4 Address" and "Subnet Mask" under your active network connection; the subnet can be derived from these two values. For example, if your IPv4 Address is 192.168.1.10 and the Subnet Mask is 255.255.255.0, your subnet is 192.168.1.0/24.