0
To find a subnet on a Windows machine, open the Command Prompt by typing "cmd" in the search bar and pressing Enter. Then, type the command ipconfig and press Enter. Look for the "IPv4 Address" and "Subnet Mask" under your active network connection; the subnet can be derived from these two values. For example, if your IPv4 Address is 192.168.1.10 and the Subnet Mask is 255.255.255.0, your subnet is 192.168.1.0/24.
What else can I help you with?
How to find subnet mask?
hi how to find network configuration if remote machine having window operating system
How do you find the Mac address on a computer?
On Windows you can enter the command inetconfig /all On Linux it's ifconfig -a Or if it's another machine on the same subnet as your computer (that piece is important) then you can ping it and then run arp -a. That will show you resolved MAC addresses in cache.
How do you find subnet mask?
Get Subnet Mask, IP Address, Gateway etc.For windows users go to START button in bottom left corner then to RUN then type COMMAND in the box - the mini DOS prompt will open in a separate window. Then type ipconfig/all and all the information you desire will be listed - ip address, default gateway, subnet mask etc.......
Find external subnet mask?
A simple way of finding out your computer's external subnet mask in Windows is to go to Start and select Run. Type ipconfig into the box, press the Enter key on the keyboard and a dialogue box will pop up with the required information.
How do you find the subnet mask when i have the IP and the Gateway?
Question is too vague, do you mean, How do you find a subnet on a windows machine? How do you find a subnet on a Linux machine? How do you find a subnet owned by the service provider??
Where can someone find a subnet calculator?
The SolarWinds Free Advanced Subnet Calculator is completely free and fully functional. All you have to do is download the SolarWinds Subnet Calculator. CiscoKits also has a free subnet calculator you can download.
What is your subnet address if your ip is89.125.27.81?
The subnet address for this ISP could be almost anything, depending on how the ISP breaks up a larger network pool into a smaller one. The default subnet would be 255.0.0.0, but that is not very likely with an ISP. You can check by using the 'ipconfig' command in Windows to see the subnet mask, or 'ifconfig' if using Linux.
What is subnet address if the destination address is 198.47.34.31 and sunet mask is 255.255.244.0?
To find the subnet address, perform a bitwise AND operation between the destination address (198.47.34.31) and the subnet mask (255.255.244.0). In binary, the destination address is 11000110.00101111.00100010.00011111 and the subnet mask is 11111111.11111111.11110100.00000000. Performing the AND operation results in the subnet address of 198.47.32.0.
How do you find sub net mask with windows vista?
Easiest way: Start, Run, type in CMD [enter] At prompt, type IPCONFIG Look for subnet, ususally something like 255.255.255.xxx
What commands can you use in Windows to display information about the subnet mask configured for a particular NIC?
a. ipconfig b. ping c. cmd d. netstat Use your textbook to find out instead of being lazy.
Find out another pc's subnet mask?
If the other PC is on the same LAN segment then it will have the same subnet mask as yours. A subnet mask is the same for all subnets within a network so that will be the same as well. For other networks it isn't important to know what their subnet is. You could always ask the other user to find out that information if you needed to know.
How do I find my gateway address and subnet mask on my Mac Book?
Google it.
