0
The subnet address for this ISP could be almost anything, depending on how the ISP breaks up a larger network pool into a smaller one. The default subnet would be 255.0.0.0, but that is not very likely with an ISP. You can check by using the 'ipconfig' command in Windows to see the subnet mask, or 'ifconfig' if using Linux.
What else can I help you with?
Do Three major fields have to be configured for TCP IP the IP address the subnet maskand the default gateway?
Yes. You need to have an IP (either static or dynamic) You must have a subnet mask that corresponds to the IP address; and a gateway IP address that is on the same subnet.
What is the subnet ip address of this ip address192.168.12.135?
192.168.12.0
Example of ip address and subnet mask which represents a Host address of decimal 123?
Example IP address of 192.168.1.123 with a subnet mask of 255.255.255.0
What is the network address of 68th subnet for IP 10.15.8.36?
Depends on how you subnet it.
What is the broadcast address for the host IP of 172.16.66.021?
That depends on the subnet's subnet mask.
What is the subnet mask for 195.70.16.93 in IP prefix format?
what is the subnet mask for this hst IP prefix format ? Host IP Address: 183.91.104.16
Given the ip address and subnet mask of 172.16.134.64 is subnet mask 255.255.255.224 valid?
This is a network address
What is the ip address of the first subnet of 172.16.0.0?
172.16.0.0. The first ip address within this subnet is 172.16.0.1
Subnet mask for 172.20.128.0?
This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.
Why can't a network 192.168.1.136 with subnet for six client addresses connect?
IP Address Additional info: The IP address for a client may not be on the correct subnet; it is possible that the subnet mask is incorrect.
What is the IP of the router that connects to this router?
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
What do the IP address and subnet mask display when used together?
Because each IP defines certain subnet mask.
