0
What else can I help you with?
Which parameter if set incorrectly will prevent a computer from communicating with any other computer within the same subnet?
The IP address.
Computer A has an IP address of 169.254.45.21 what does this mean?
This is an APIPA (Automatic Private IP Addressing) address. When Windows computers can't get an IP address from a DHCP server, they automatically assign themselves this address.
What is the subnetmask for 194.117.4.211.?
194.117.0.0 . Because it is a class C IP address.
Examples of class A IP address?
An example is 10.0.0.1. An IP address consists of four numbers, separated by dots (so there are three dots in total). Since each of the number represents a byte (or "octet"), each of these numbers is in the range from 0 to 255. Any IP address in which the first of these four numbers is in the range from 0 to 127 is considered to be a "Class A" address. (In the binary representation, that means that the first bit is equal to zero.)
What is the main function of an IP address?
Provide a unique logical address for each device on the network. Each networked device has a globally unique physical address, commonly referred to as the MAC-ID.While the MAC-ID is guaranteed to be globally unique, it refers to a particular hardware, not to a particular device. For example, your PC's Ethernet MAC-ID will change when the LAN card changes, but its logical address (the IP address) may not have to change at the same time. This allows other devices to continue communicating with your PC even after its MAC-ID changed.IP addresses are also grouped into subnets, which supports routing. It messages were sent using MAC-ID (physical) addressing, the message must be repeated into every subnet because the destination device could be anywhere.
Do Three major fields have to be configured for TCP IP the IP address the subnet maskand the default gateway?
Yes. You need to have an IP (either static or dynamic) You must have a subnet mask that corresponds to the IP address; and a gateway IP address that is on the same subnet.
Example of ip address and subnet mask which represents a Host address of decimal 123?
Example IP address of 192.168.1.123 with a subnet mask of 255.255.255.0
What is the network address of 68th subnet for IP 10.15.8.36?
Depends on how you subnet it.
What is the broadcast address for the host IP of 172.16.66.021?
That depends on the subnet's subnet mask.
What is the subnet mask for 195.70.16.93 in IP prefix format?
what is the subnet mask for this hst IP prefix format ? Host IP Address: 183.91.104.16
Given the ip address and subnet mask of 172.16.134.64 is subnet mask 255.255.255.224 valid?
This is a network address
What is the ip address of the first subnet of 172.16.0.0?
172.16.0.0. The first ip address within this subnet is 172.16.0.1
Subnet mask for 172.20.128.0?
This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.
Why can't a network 192.168.1.136 with subnet for six client addresses connect?
IP Address Additional info: The IP address for a client may not be on the correct subnet; it is possible that the subnet mask is incorrect.
What is the IP of the router that connects to this router?
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
What do the IP address and subnet mask display when used together?
Because each IP defines certain subnet mask.
Why use the more than one subnet in one ip address?
You don't use more than one subnet in one single IP address. The IP address indicates what subnet you are in and a client may belong to only one subnet at a time.An IP address range may indicate the presence of more than one subnet, however. This is done to split up a larger network into multiple smaller networks.
