LC FOR VERNIER CALIPER-0.1mm
LC FOR MICROMETER -0.01 mm
L.C- NO OF SMALLEST DIVISION ON MAIN SCALE
-------------------------------------------------------
TOTAL NO OF DIVISION ON VERNIER SCALE
*Micrometer have a rotary handle and whereas vernier have a slider. *Micrometer is for measuring diameters while vernier is for measuring inside & outside diameter as well as depth. *Least Count of Vernier Caliper is 0.02mm *Least Count of Micrometer is 0.01mm
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
0.02
The least count of vernier caliper is 0.01mm while the least count of screw gauge is 0.001 mm. ... Difference between screw gauge and vernier caliper in tabular form. Micrometer Screw Gauge Vernier caliper It has a circular scale. It has a vernier scale. It rotates to measure the objects. It slides to measure the length.
Former i.e. Vernier Caliper
Very little, the screw gauge checks the pitch of threads while the vernier caliper is use to accurately measure distances.
there is a big different between the vernier caliper and micro meter caliper,the vernier caliper they can use the outside and inside measurement while the micro meter caliper it's just only use outside measurement..
A screw clamp on a vernier caliper is used to secure the position of the jaws once a measurement has been taken. By tightening the screw clamp, the jaws are held in place to prevent accidental movement and ensure accurate readings. This feature helps to maintain the precision and consistency of measurements taken with the caliper.
The most compelling reason to select the micrometer Screw over the Vernier caliper is the guarantee that when measuring a flexible surface, the same amount of pressure is applied between samples. The Vernier caliper has the ability to measure internal and externally, but if precision is required, the micrometer screw is the tool of choice.
Vernier caliper has an accuracy of 0.01 cm. But screw gauge has still more. It will be able to give even 0.001 cm. So even third decimal could be got accurately when we use screw gauge instead vernier caliper.
A screw gauge has a smaller pitch than a Vernier caliper, which allows for more precise measurements. The screw gauge also provides a digital reading, which reduces human error in reading measurements. Additionally, the screw gauge has a finer scale that allows for more accurate readings compared to a Vernier caliper.
Internal and external jaws. Locking screw. Scale. Depth gauge.