Want this question answered?
There are plenty of 2nd grade level sentences you could make up about solids, liquids, and gasses. You could say solids can be picked up and liquids are wet for example.
The synthesis of soap, which is known to chemists as saponification, is done with fat, and bases such as sodium hydroxide (NaOH). It does not involve acid slurry. Although, if you were going to try this at home, it might be a good idea to keep some mild acid on hand to neutralize the base, if your reaction gets out of hand or spills on your skin while it is still at a very high pH level.
Yes. Concrete is made from cement, and the manufacture of cement releases carbon dioxide that had been sequestered underground for millions of years. Since the greenhouse effect is the result of atmospheric greenhouse gases, principally carbon dioxide, retaining heat, any increase in the atmospheric level of carbon dioxide contributes to the greenhouse effect and therefore to global warming. Because it is made from cement, concrete is an important contributor to the greenhouse effect.
Yes a liquid soes have a fixed volume no matter in any apparatus
Things are dissolving. Solids break up into ions. for example in a solution of salt water, NaCl is put into water and breaks up into Na+ and Cl-
1-2ppm
NONE. jk I wanna know for ponds
NONE. jk I wanna know for ponds
If you are installing on a concrete slab, then make a sand bed with sand & cement mixed to a praportion of 1:25. Level the bed. Then make cement slurry by mixing water. Pour the slurry on the bed for about an area slightly bigger than tile. Place the water soaked tile & give light blows by a wooden piece. then repeat the same procedure for next tile. Next day clean the joints & remove all excess cement slurry which has come out. Rake the joints. Then fill the joints by slurry of white cement. After a drying period of 2 hours, remove the excess white cement slurry. Pour some water for three days to keep the joints wet. If you want to install on prelaid flooring tile, then first grind the existing tile surface to make it rough. Then make cement slurry with polymer additive. Then paste the tiles on this rough surface by applying 3 to 4mm of layer of slurry. Sanjay - nikiasso@yahoo.com
Level Seven - 2011 SUSPENDED was released on: USA: 2014
what is ph level of waste water from cement industry
The level of total dissolved solids in water does affect chlorine disinfection. That's why there is a recommended specification for the level of total dissolved solids in water for the water that is sent to homes.
They are:solutions: substances mix at the molecular level, can be distributed evenly, solids pass through normal sieves with liquid solvent; alloys are solutions of solid metalssuspensions : solute is suspended but can be physically separated, may settle outcolloids: uniform suspension; solids can be separated physically using a sieve
what is ph level of waste water from cement industry
If you breath or have a blood alcohol level of .08 your license will be suspended.
what is ph level of waste water from cement industry
The pH level of waste water from the cement industry varies greatly. Most large cement producers have waste treatment facilities that bring the pH levels down to normal rain water levels.