for a 86-1/2 to 92 supra, the expansion valve is located in the evaporator case. mike b.
YOU MUST REMOVE THE EVAPERATOR CASE FROM INSIDE THE TRUCK ON THE PASSENGER SIDE AND YOU WILL SEE THE EXPANSION VALVE.
There isn't one
passenger side firewall. behing black charcoal canister, a foot from the hydraulic hood support.
The expansion valve is located on the passenger side of the vehicle behind the dashboard. To gain access to it you will have to remove the glove box and the dash.
you can adjust it via the idle control valve.
Do you mean the expansion valve for the A/C? That is near the evaporator under the dashboard.
Where is front expansion valve for chevy suburban 1997
its right beside the wiper switch
how do I replace the AC expansion valve on a Mercedes C280 sedan. location and procedure
http://www.cygnusx1.net/Supra/Library/TSRM/MK2/manual.aspx?S=EC&P=3
The blowoff valve on the Toyota supra is fairly simple to install. You will need the following items.. 1. Tools 2. Toyota Supra manual and repair guide Now, read through manual until you find the spot where it says how to "install the blowoff valve". Next, and this is important. READ that part carefully. After reading the manual, decide what tools you are going to use. Personally, I have a preference for wrenches, pliers, and ladders. Use your tools (see list item 1)and begin repairs. Thanks and good luck.
There is no PVC valve on the 4cyl Toyota Camry. ÊThe location of the PVC valve on the 6cyl is center upper engine area, mounted in the rear valve cover.