Want this question answered?
draw 0.104 amps
In fluorescent tubes the number represents the diameter of the tube. The tubes are measures in 1/8ths of an inch. T8 would be 8/8ths or 1 inch. T5 would be 5/8ths of an inch. Older fixtures took T12 which would be 12/8ths or 1.5 inches.
Fluorescent tubes are measured in 1/8ths of an inch. A T8 would be 8/8ths or one inch. Likewise a T12 would be 12/8ths or one and a half inches.
A T10 tube light is a type of fluorescent light bulb that is 10/8 inches (25.4 cm) in diameter. It is commonly used in commercial and industrial settings as a direct replacement for T12 or T8 tube lights. T10 tube lights provide efficient and long-lasting lighting for a variety of applications.
Fluorescent tube are graded in 1/8 ths of an inch. When you speak of a T8 what this means is that the tube diameter is 8/8 ths or 1 inch. A T12 is 12/8 ths or 1 and 1/4 inches. What you have to find out is what type of ballast is in the fixture. T12's are associated with transformer type ballasts, like wise T8's are associated with electronic ballasts. The T8's have a different pin configuration wiring than that of the T12 tube. The T12 will not work in sockets wired for electronic ballasts.
draw 0.104 amps
In fluorescent tubes the number represents the diameter of the tube. The tubes are measures in 1/8ths of an inch. T8 would be 8/8ths or 1 inch. T5 would be 5/8ths of an inch. Older fixtures took T12 which would be 12/8ths or 1.5 inches.
A T-10 lamp represents a tubular lamp like a fluorescent tube. These types of tubes are measures in 1/8 ths of an inch. So a T- 8 would be 1 inch in diameter. A T-10 would be 10/8 ths of an inch or 1 1/4 inches in diameter.
The threads on a candelabra base bulb are just over 3/8 inch across where a regular light bulb has threads that are approximately 1 inch across
it should say on the ballest/ transformer located in the fixture somewhere
High Output ( the High Output version of the 5.0 liter / 302 cubic inch V8 )
Attaching a 12-inch red or fluorescent orange flag to the end of a load lets other drivers know that part of a flatbed load is overhanging the back of the trailer. This is legal as long as the load is not more than 2 feet past the end of the trailer.
Final output resolution determines the min/max frequency.ie the amount of lines per inch
Fluorescent tubes are measured in 1/8ths of an inch. A T8 would be 8/8ths or one inch. Likewise a T12 would be 12/8ths or one and a half inches.
capability to print dots per inch (DPI)
305 cubic inch High Output, 5 liter
.044 inch - high output .054 inch - Cobra according to www . motorcraft . com ( no spaces )