0
A DC motor is an electric motor that turns on the application of a DC current.
A DC Servo motor is similar but it produces a DC current from a mechanic movement of the armateur or may also produce small movement from the application of low current..
An example of a servo motor is as was used in steering gears and auto pilots. The physical turning of the wheel either caused a current to flow or caused an inbalance in the electrical systems, this causes a counter action to restore the original position.
What else can I help you with?
What is the main difference between a trim tab and a servo tab?
the main difference is that on the servo tab the trim surface is gonna move as the stabilizer moves. Instead on the trim tab the surface is gonna move alone without moving the elevator
What is the difference between a motor tic and a compulsion?
The main difference between a motor tic and compulsion is that one is that a motor tic is involuntary and a compulsion is not. A compulsion is more of a learned or hereditary behavior.
Does the servo motor contain the servo?
A "servo motor" and a "servo" are the same thing. Servos are constructed from three basic pieces; a motor, a potentiometer (variable resister) that is connected to the output shaft, and a control board. The potentiometer allows the control circuitry to monitor the current angle of the servo motor. The motor, through a series of gears, turns the output shaft and the potentiometer simultaneously. The potentiometer is fed into the servo control circuit and when the control circuit detects that the position is correct, it stops the motor. If the control circuit detects that the angle is not correct, it will turn the motor the correct direction until the angle is correct. Normally a servo is used to control an angular motion of between 0 and 180 degrees. It is not mechanically capable (unless modified) of turning any farther due to the mechanical stop build on to the main output gear.
What is the difference between a Mazda astina and astina sp?
The main difference that i know is the sp had the dohc motor
What are the main parts of a DC servo motor?
Motor inside and outside movement and non movement material
What are the differences between al servo and one shot focusing modes in photography?
In photography, the main difference between AI Servo and One Shot focusing modes is how they track and focus on moving subjects. AI Servo mode continuously adjusts focus on a moving subject, while One Shot mode locks focus once and does not adjust. AI Servo is best for capturing action shots, while One Shot is ideal for still subjects.
What is the difference between polyethylene and polyester?
what is the main difference between polyethylene and polyesters what is the main difference between polyethylene and polyesters
What is the main difference between the two products?
The main difference between the two products is their ingredients.
Whats The difference Between A Regular Ford And A Ford Hybrid?
The main difference between hybrid and non-hybrid vehicles is that hybrid vehicles use a bank of batteries along with an electric motor to power the car.
What is the difference between 5-20 and 5-30 motor oil?
The main difference is that 5w20 is thinner at operating temperatures than 5w30. They both have similar cold flow ability.
What is the difference between USM and STM focusing mechanisms in camera lenses?
The main difference between USM (Ultrasonic Motor) and STM (Stepping Motor) focusing mechanisms in camera lenses is the way they operate. USM uses ultrasonic vibrations for fast and quiet focusing, while STM uses a stepping motor for smooth and silent focusing.
What is the main difference between animation and simulation?
There is no difference.
