The wire used in the armature windings will be a different length and thickness, suitable for the voltage used and the power required.
A dc motor running on a potential difference of 25 volts draws 9.8 A. It lifts a load of 48 pounds 12 feet in 5.5 seconds. How much work does the motor do? How much power does it deliver? How much poser does it consume? What is its efficiency?
If a 48 Volt club car electric motor requires 48 volts, then it should be given a 48 volt power source, or something close to it. Too many more volts and it may burn out; not enough volts and it may not run or it will try to draw too much power and burn out the power supply.
You can increase the speed of an Yamaha 48 volt golf cart by installing a larger motor or more powerful batteries. This will produce more power to the wheels and more speed.
0.004It has 3.05 Nmthat converts to3.05 Nm = 2.25 Lb / Ftwhich converts to .004 hpEDIT: This answer is entirely wrong. Power is torque multiplied by speed. Your answer is dependent on the voltage supplied to the motor as well. According to Animatics' torque-speed curve on the motor datasheet, this motor has a maximum power of approximately 460 Watts at 48 Volts (0.62 Horsepower).-Brian
we know motor rpm, gearbox ratio, gear spoket no of teeth, conveyor pully spoket no of teeth and conveyor pully O.D. Exm- we have a motor of 1500 rpm, gearbox ratio 30:1, gear spoket no of teeth 24, conveyor spoket no of teeth 48, and conveyor pully (head pully) od is 200 mm, Solu- motor speed- 1500 rpm gear output - 1500/30 = 50 rpm conveyor pully rpm - 24*50/48 = 25 rpm conveyor pully cercumfrance - 200*3.14 = 628 mm or 0.628 meter conveyor speed - 25*0.628 = 15.700 meter per menuts
% decrease = the absolute value of the difference of the original value and the new value divided by the original value multiplied by 100%% decrease:= |48 - 14|/48 x 100%= 34/48 x 100%= 0.7083 x 100%= 70.83%
48 to 56 quarts of oil, or 12-14 gallons.
14% of 48=(14/100)*48=6.72
14% of $48 = 0.14 x $48 = $6.72
14 is not a factor of 48 because 48 is not divisible by 14(48 = 14x3 + 6).
3.4286
No - 48/14 = 3.428571 recurring (that is, 3.428571428571...)
14 does not go into 48 evenly. To test whether it does, you can divide 48 by 14. If your answer is an integer (ex. 1, 2, 3, etc..) it can go into it evenly. 48/14=3.24857 Since the answer isn't an integer, 14 does not go into 48 evenly.
3.4286
there are many possible answers. Here is one sequence that worksThere are the monic divisors of xn -1 with coefficients coefficients in {0,1,-1}2, 4, 4, 8, 4, 14, 4, 16, 8, 14, 4, 48, 4, 14, 14, 32, 4, 50, 4, 48, 14, 14, 4, 162, 8, 14, 16, 48, 4, 136, 4, 64, 14, 14, 14, 286, 4, 14, 14, 160, 4, 136, 4, 48, 48, 14, 4, 550, 8, 50, 14, 48, 4, 186, 14, 164, 14, 14, 4, 1124, 4, 14, 48, 128, 14, 136, 4, 48, 14, 136
LCM of 14, 48, and 96 = 672
62-48 = 14