0
What is the maximum cable length for a 100 base T ethernet lan?
Wiki User
∙ 13y ago
The maximum length of a segment is usually 100 meters. In practice, it's a good idea to stay under 90 m for fixed cables, since patch cables at either end are likely to add another several meters to the overall length.
Wiki User
∙ 12y ago
Wiki User
∙ 15y ago100 meters or 328 ft. Answer came from Jean Andrews 6th edition homie.
Wiki User
∙ 14y agoAround 100 Meters Practically
2.5Km Theoretically
Wiki User
∙ 14y ago100 meters.
100 meters.
100 meters.
100 meters.
Wiki User
∙ 14y ago328 ft or 100yds
Wiki User
∙ 13y ago100 meters or 328 feet.
Wiki User
∙ 14y ago100 meters.
Add your answer:
Earn +20 pts
10base2 and 10base5 wires refers to?
10BASE2, or IEEE 802.3, is an early Ethernet Standard that makes use of industry-standard RG-58 coaxial communications cables connected to BNC T-connectors. 10BASE2 gets its identifier, assigned by the Institute of Electrical and Electronics engineers (IEEE), from the following characteristics: "10" means it has a maximum transmission speed of 10Mbps; "BASE" is shorthand for "Baseband Transmission" or "Baseband Ethernet," meaning that the medium only transmits Ethernet signals; and "2" refers to its maximum network segment length of 185 meters, rounded up to 200 meters.
What ethernet operates at 100 mbps and uses stp or utp cabling rated cat-5 or higher?
100 Base T
Base limit register?
Base and limit registers are special hardware registers. When a process is run, the base register is loaded with the physical location where the process begins in memory. The limit register is loaded with the length of the process. In other words, they define the logical address space
What standard supports a speed of 100 mbps using two sets of cat 3 cable?
100 BaseT uses CAT 5 cabling. 100 Base T2 uses two sets of CAT 3 to achieve speeds of 100Mbps
Which encoding is used in Ethernet LAN?
Ethernet indicates 10 Mb by definition. It used Manchester encoding. This encoding manages timing within each bit. FastEthernet is 100 Mb and uses a combination of 4b/5b and MLT-3 encoding, over 2 pairs. Gigabit Ethernet uses 8b4qt (?) and PAM-5 I'm not sure I got all this right, but here are the details as I understand them: 10 BASE T is Manchester encoding - Basically, this means that each symbol is either a transition in the middle of the bit time from a 0 to +v (a 1) or a transition in the middle of the bit time from +v to 0 (a 0). 100 BASE T uses a combination of 4b/5b encoding to prevent a string of 1s or 0s from causing a loss of timing and MLT-3 signalling to allow the same information to travel at a slower frequency. 1000 BASE T uses a combination of 8b4qt (?) (this is 8 bits, separated onto 4 quernary signals that carry 2 bits each), and PAM5 signaling (a 5 voltage-level signal that effectively causes a transition at each signal and 4 possible states, signalling 2 bits).
What Ethernet specification has the longest maximum segment length?
1000 base‑lx
Is the Cable Cat 6 available in 20 meters?
The Cable Cat 6 is an Ethernet cable that supports fast Ethernet 10G BASE-T. This cable is available in a 20 meter length online from various retailers including cabling4less.
Coax uses what type of LAN?
10BASE2 is a variant of Ethernet that uses thin coaxial cable. The 10 comes from the maximum transmission speed of 10 millions of bits per second, The BASE stands for baseband signaling, and the 2 supposedly refers to the maximum cable length of 200 meters.
What thin ethernet cable is used for 10-base-2 Ethernet 802.3 Ethernet thinnet?
10 Base 2 uses RG58. Since this is in the Catagory for Xbox. you can not connect this directly to your Xbox, you must use 10BaseT or a converter to get from 10Base2 to ethernet with an RJ45 Connector.
Which thin Ethernet cable is used for 10-base-2 ethernet 802.3 ethernet thinnet?
10 Base 2 uses RG58. Since this is in the Catagory for Xbox. you can not connect this directly to your Xbox, you must use 10BaseT or a converter to get from 10Base2 to ethernet with an RJ45 Connector.
What symptoms would probably be present if your 100 Base TX Ethernet network length is 200 meters?
B. Excessive late collisions
What is 1000 Base-LX?
1000baseLX is a fiber optic standard for gigabit transmission. It can be up to 5 km using SMF fiber. MMF fiber will allow a maximum segment length of 550 meters.nodes per cable segament
10base2 and 10base5 wires refers to?
10BASE2, or IEEE 802.3, is an early Ethernet Standard that makes use of industry-standard RG-58 coaxial communications cables connected to BNC T-connectors. 10BASE2 gets its identifier, assigned by the Institute of Electrical and Electronics engineers (IEEE), from the following characteristics: "10" means it has a maximum transmission speed of 10Mbps; "BASE" is shorthand for "Baseband Transmission" or "Baseband Ethernet," meaning that the medium only transmits Ethernet signals; and "2" refers to its maximum network segment length of 185 meters, rounded up to 200 meters.
Is an Ethernet an example of a baseband system?
It might be. On the other hand, a base-band system is a system that controls a other type of system for saying a Cable box is a base-band system because it provides you with the channels you want to watch
Whats the length of the altitude of a triangle or a quadrilateral?
The length depends on the triangle or the quadrilateral. Normally the figure is shown with one side horizontal, which is called the base. In a triangle, the altitude is the the line from the third vertex down to the base (or the extended base) and which is perpendicular to the base. In a quadrilateral, it is similar, but is the longer of the two lines from the two vertices that are not on the base itself. maximum length of a line perpendicular to the base that
Can you connect the Ethernet cable directly from your airport express to your MacBook Pro and access internet?
If you already have an Airport Extreme Base Station and your Express is used simply to either extend your network range or to use the AirTunes function, then yes you may plug directly to the Express to connect to the internet although the purpose of the Express is to be able to access the internet wirelessly. However, if you do not have an Airport Extreme Base Station and are using only the Express to connect to the internet, then you may not connect to the internet by using an Ethernet cable and plugging into the Express. This is because if you are using the Express to connect the internet, the ethernet plug will need to be plugged into your modem.
How you find the area of a rectangle from the perimeter and base length?
perimeter (P)=2(length+base) find length, area = length * base = (p/2-base)*base
