Rule of thumb is no more than 50 feet.
it is ratio of the total heat transfer from the surface area associated with both the fins and exposed portion of the base to maximum heat transfer from same surface area (in ideal conditions we get maximum heat transfer)
Specific heat of fuel oil in btu: 1)minimum-0.4 2)maximum-0.5
heat of hydration should not be more than66 cal/g and 75cal/g for 7&28 days respectively
what is the difference between product analysis and heat analysis
Yes there is an optimum flow rate. Kind of! The heat pump manufacturer will post on the internet or in the users guide what the maximum and mimimum flow rate through his heat pump should be. I take it that the optimum then, is anywhere within that range. My pump manufacturer prescribes 20 GPM to 70 GPM for the heat pump I will be using. Too low a flow causes the heat pump to overheat. Too high a flow is hard on system components. dburr
first optical smoke / heat detector to second optical smoke/heat detector maximum distance.
air handler
5M Detector to Detector
Heat will be distrubuted evenly throughout the room. The fire is maximum distance from an exterior wall, and will loose less heat through the wall to the outside.
Heat and light at an adequate distance.
The distance between molecules increases as the heat increases
The maximum heat input is about 200 kelvin.
The Maytag MEC5430BDW Electric Cooktop can reach maximum heat in approximately 5 minutes.
3.75
Why should there be a maximum? If there is friction, ALL the mechanical energy will eventually be converted to heat.
When the maximum pressure of the refrigerant is achieved in the condensor and the maximum temperature differential is acheived between the condensor coil and the surrounding medium. (air, water, or other)
Theoretically there is no maximum heat like there is cold. So if you had the means to, you would jest be heating plasma if you tried to heat mater to the non existing "limit".