Want this question answered?
a title should not exceed Ten words
a title should not exceed Ten words
a title should not exceed Ten words
70 inches is usually regarded as the absolute maximum length a driveshaft should be without adding a center support bearing
A length of 500 m a day maximum
it depends on the state
10 minutes
The rope should be more than twice the length of the climb. The length of the climb is the maximum distance that the belayer is going to be from the climber.
You should have an expansion joint every 20" or less.
vessel length times vessel width divided by 15
Lap length is the length overlap of bars tied to extend the reinforcement length.. Lap length about 50 times the diameter of the bar is considered safe. Laps of neighboring bar lengths should be staggered and should not be provided at one level/line. At one cross section, a maximum of 50% bars should be lapped.In case, required lap length is not available at junction because of space and other constraints, bars can be joined with couplers or welded (with correct choice of method of welding).
why should teachers challenge students