0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How long will it take a forklift to load all the output of three 4 hour shifts of a sawmill producing 500 items per hour in bundles of 50 if the forklift can load 10 bundles per hour?
In each hour the sawmill produces 500 ÷ 50 = 10 bundles. Each hour the forklift can load 10 bundles which is the output of the sawmill in an hour. Therefore it will take 3 × 4 hours = 12 hours to load all the output.
Cargo load capacity of a Chevy s-10?
1/4 ton
What is the size of 10 ton truck?
10 Ton is the weight capacity of the truck and 1 Ton =1000kg = 1 000 000g = 1Mg. Therefore a 10Ton truck can have many sizes but was designed to carry a load of 10 000kg. Hope this helps.
A crane raises a 2.5 ton load vertically in 4 minutes and 10 seconds The crane motor is rated at 10kW What is the vertical height to which to load is raised?
101.9m
Who made the train?
In 1804 a train carried a 11-ton load and 70 men along the street at a 10-mile track at a speed of 5 mph.
How much weight can you put in the bed of a 1991 S-10?
The S-10 pickup truck is considered a 1/4 ton pickup, so 500 lbs would be maximum payload to carry safely.
Is the Chevy S-10 considered a quarter ton or a half ton?
1/4 ton.
What is meant by pressure rating of pump?
Pressure rating means maximum pressure at which pump can operate safely.Pump delivers a pressure according to load. If load is more , it'll deliver more pressure. At some point load is large enough to cause damage to parts of the pump. That pressure is rated pressure. For example if pump rating is 10 bar, it can asustain safely the load that creates 10 bar pressure.
What is the condition for maximum transfer theorem?
For maximum power transfer the load resistance should be equal to the source resistance.An often misunderstood theorem. It applies strictly where one wishes maximum power transfer.It was misused for example in early power systems by trying to match the generator resistance to the load resistance.And it has little application in audio systems, where Power is much less important than Distortion. [for least distortion, the output impedance of the amplifier should be less than 10% of the impedance of the load.]
What size main breaker do you need to run 10 gauge wire?
The size of the main breaker depends on the maximum current rating of the 10 gauge wire and the load it will be powering. Typically, a 10 gauge wire is rated for a maximum current of 30 amps. Therefore, a 30 amp main breaker would be suitable for running 10 gauge wire. However, it is important to consult local electrical codes and consider the specific load requirements before making a final determination.
How to convert gross ton to net ton?
The conversion is not a simple mathematical exercise. You need to know the mass of the container. For example, a truck with a load of 10 tons might have a mass of 12 tons - the additional 2 tons being the mass of the [empty] truck. In that case, the gross mass is 12 tons and the net mass is 10 tons.
How many pouds are in 10 tons?
1 ton = 2240 lb 10 ton = 10 x 2240 lb = 22400 lb
