there is no limit look at your circuit breaker it will say example my single pole breakers are 20 amps which according to OHM's law says that is equal to a maximum of 2300 watts (Voltage X Current = Power)
The maximum power consumption for a device operating at 30 amps is 360 watts.
I assume you are talking about the newest Samsung 65", the one with the curved screen. That draws 276 watts which, using watts=volts x amps and assuming your voltage is 115v, gives you 2.4 amps.
The number of watts for 12.5 amps is 12.5 times the voltage.
Watts = Amps x Volts x Power Factor Maximum value of PF is 1 for a resistive load. If you have 120 volts and a PF = 1, then amps = 10.
watts = volts x amps x power factor
No. 20 amps at 120 volts will handle a maximum of 2400 watts. And you should never continuously load a 20 amp 120 volt circuit to no more than 1920 watts.
To find the maximum current draw, use the formula: current (A) = power (W) ÷ voltage (V). In this case, 2160 watts ÷ 240 volts = 9 amps. Therefore, the appliance can draw a maximum current of 9 amps.
that would be about 1200 watts maximum power anonymous@oola.com
To find the amp draw, use the formula: Amps = Watts / Volts. In this case, 590 watts divided by 120 volts equals approximately 4.92 amps. Therefore, the unit draws around 4.92 amps when operating at its maximum power of 590 watts.
You need the formula: Amps * Volts = Watts But you get to do the math.
To convert watts to amps, you can use the formula: Amps = Watts / Volts. In this case, to convert 200 watts at 12 volts to amps, it would be: 200 watts / 12 volts = 16.67 amps. So, 200 watts at 12 volts is approximately 16.67 amps.
Watts = volts x amps x power factor Power Factor is 1 for resistive loads and decreases for other loads like motors. Maximum watts would be 12 x 220