A 20 amp GFIC is the breaker size. 20 amps x 110-120 volts equals 2200 to 2400 watts being drawned or used.
In the UK it is illegal to have an electrical outlet in a bathroom except that used by an electric shaver, the maximum wattage is 1 amp.
No way of telling unless you know the current of all devices that use the circuit. The maximum wattage for the circuit, assuming a resistive load (no motors) would be: Watts = Volts x Current.
A switch does not use wattage, or consume power which is a better way of putting it. It depends on what appliance is being controlled by the switch.
yes
Without knowing the wattage that the hair dryer is rated at an amperage can not be stated. If you find the wattage, use this equation to find the amperage. I = W/E, Amps = Watts/Volts.
You should not use a bulb above 100watts.
I don't know the maximum amount of equipment can be hooked up to an outdoor power outlet, but I'm pretty sure you can ask any hardware store for that type of information.
Find the wattage rating on the dimmer controller. This is the maximum allowable wattage that the lamp in the fixture should be. Lamp wattage ratings under the rated dimmer wattage is fine but do not install a larger wattage lamp that is over the dimmer control's rating.
No way of telling unless you know the current of all devices that use the circuit. The maximum wattage for the circuit, assuming a resistive load (no motors) would be: Watts = Volts x Current.
You need an outdoor outlet in order to hook up outdoor bose speakers.
300watts
The wattage will depend upon the type of bulb and the number of lights on the string. It will tell you on the package what each bulb requires in wattage, so you only need to multiply that by the number of bulbs in the string. so, number of bulbs x wattage requirement for each bulb = wattage requirement.
Voltage does not affect the cost to run. You pay for the wattage, the higher the wattage the more it will cost to run.
10
In the US at least, no, linear amps are not legal for use on CB radios. The maximum wattage permitted for AM transmission is four watts, and the maximum wattage permitted for Single Sideband is 12 watts.
A switch does not use wattage, or consume power which is a better way of putting it. It depends on what appliance is being controlled by the switch.
300 W.
outlet